Search results for query: *

340 exhaust manifolds for sale. $350 + shipping from McKees Rocks,PA 15136

All parts came from a Dodge Demon V8 K frame (340 w/ washer) -- $125 Lower control arms (with sway bar tabs) -- SOLD V8 Center link - $50 Buyer pays all shipping costs.

Everything is off of a --72 Demon 340 For sale -- -- V8 K-Frame -- $275 + shipping ***Has the washer welded to the front of the frame ***K-frame only - no suspension, or steering parts Comes with the front strut bars, ad lower control arms w/ sway bar tabs, ***Does not include the...

72 Demon 340 -- V8 K-Frame -- $150 + shipping ***Has the washer welded to the front of the frame ***K-frame only - no suspension, or steering parts (I'll get some pics taken tomorrow and posted when I get home work)

I bought a Wilwood brake kit for an 8.75 rear several years ago from either someone here on FABO or over on Moparts… I do not have the kit number but after trying to mock it up today on my rear end it appears to be a 2.36 offset kit and after measuring my rear I actually need a 2.50 offset kit…...

Anyone have a use for a small block windage tray? It needs media blasted and cleaned up from sitting around in a corner of the warehouse I finally decided to clean out for the last 5-7 years. Price - $30 + shipping

I have a 8.75 Rear end from a 67 B-body that is 100% complete… Housing, axels, complete drums, and 741 2.94 gear open center section… I bought for another project and end up selling the project and the buyer didn't need the rear end. Willing to ship if buyer wants to pay the shipping costs...

I have for sale a very clean 71-4 B-Body 8.75 housing and axles -- Bare housing an axles. Here are the specs on the housing… Flange to flange -- 57.75" Perches center to center -- 47.25" Could be cut down or used as is. $175 + shipping

For Sale is a used but in great conditional Mopar Performance MSD 6AL Ignition. Part # P4876728. Comes with the pills shown in the pics. Worked great when I took my drag car apart. Price -- $150 + shipping

I am selling my 489 center section for a 8.75 rear end. Bought for my car had the SG rebuilt and new bearings, and seal put in it and have decided to use 3.55 gears instead so this is for sale. Drop in ready. Its a 489 housing 391 gears rebuilt cone SG New bearings & seal Price -...

Brand new never bolted onto a car still in original box from mancini racing. MREAM23502 - 8-3/4 threaded adjustable pinion snubber. Here is a link to their website. http://chucker54.stores.yahoo.net/newpr834adpi.html Bought for my car, but went with a triangulated four link set up...

FAN SHROUD -- Part Number - #4088035 -- Listed as a fan shroud for a 340 engine. I was saving it form a 72 Demon but will longer be using it. It is also correct for a 318 or 360. Very good condition, no cracks and broken tabs that I can see from thorough inspection. Just dusty from...

I have the following set of small block 340/360 heads -- Complete as pictured with valves, springs, rocker shafts, and rockers. The number on the heads is -- #3418915 Letter is a -- U I measure the valve with my cheap calipers and it looks to be 2.02 valves. I do not have other info on...

727 Deep trany pan set up for sale. $65 + shipping Comes with the steel pan (has drain plug) New pan gasket New space, bolts, and o-ring Never install on a trans

SOLD --- 90 degree oil filter adapter with both -- $25 + shipping -- SOLD Mopar ignition -- same as msd6al with 7000 rpm pill install. I also found the following Pills that go with it. 3000, 6000, 8000 -- worked great in my drag car -- $175 + shipping

FOR SALE --727 Deep trans pan. spacer still in bag, big or small block Price $75 + shipping from Pittsburgh PA... PM or email me. May consider trades on Demon specific parts or Alterkation parts.

FOR SALE -- 7 blade SB Fan with clutch fan Price $80 + shipping from Pittsburgh PA... PM or email me. May consider trades on Demon specific parts or Alterkation parts.

FOR SALE -- Holley Blue Electric Fuel Pump # R80616AA /// 1212A Holley Regulator - matched for pump Fram Fuel filter - HPG-1 Price $100 + shipping from Pittsburgh PA... PM or email me. May consider trades on Demon specific parts or Alterkation parts.

FOR SALE -- Cap and Rotor -- No clue what is for or from CAP # 53008778 ROTOR #53008767 Best offer + shipping from Pittsburgh PA... PM or email me.

FOR SALE -- 742 Center with 456 gears and a spool. Large yoke. Ran in my Dodge Demon and ran great when removed. Price - $450 + shipping from Pittsburgh PA... PM or email me. May consider trades on Demon specific parts or Alterkation parts.

FOR Sale -- 750 Dominator Carb -- I was planning to use this on an R3 SB stroker motor that never got built so it is time to cut it lost. Everything you see. Carb, adaptor plate, and fuel line. Price - $500 + shipping from Pittsburgh PA... PM or email me. May consider trades on Demon...

FOR SALE -- CALLIES RODS--- I bought these from Eric @ House Racing in 2006 for a R3 stroker SB motor I was planning and never got around to. I have never used these rods. Was told they were sold through Callies (still have the printed email from House Racing) Rod Info: Length - 6.300...

I have a 742 center section with a spool and 456 gears. I parted out the car to go a new direction and still have this. $450 + shipping. PM me or email me. Willing to consider trades...

~~~FOR SALE~~~ Holley Dominator Carb - 750 CFM -- comes with adapter plate and fuel line. (This set up new at Jegs is $900) $500 + shipping 742 Center section - 4.56 Gears - Spool - large yoke - ran great when pulled from my car - $450 + shipping Parts will ship from Pittsburgh, PA...

I have the following for sale -- Perfect for that slant 6 to V* swap on a budget. Complete 318 carb to pan -- Stock motor, unknown miles, ran good, no smoke, has a eddy intake and holly carb on it now. Complete with all pullies, wiring, distributor etc. Possibly steel crank (I am trying to...