Search results for query: *

I have an extra set of big bolt pattern spindles and caliper brackets that are from a 1974 Dart Sport. They are super clean, not damaged, painted cast iron and the brackets are black. Also included are the original bracket bolts, and nice original ball joint bolts. I'm asking $125 shipped to the...

I have a set of 4 (enough for one engine) pn P4876340 Mopar Performance Blue roller rockers, LEFT hand offset, for use with W2/W5 heads. New, never used. 1.5 ratio. MP no longer makes these! Other than the color, they are the same as the Crane Gold Race rockers (which apparently are getting hard...

I have 1 (qty=1) Crane Gold Race rocker arm, new/unused, thats up for grabs. Pn 69765L-1, it is a 1.5 ratio, LEFT hand offset, for use with W2/W5 heads. I'm asking $30 shipped. Part is located in East Palestine, OH.

I have a black anodized billet aluminum 2-bolt m/c adapter to adapt the newer style m/c to the cars with the 4 studs through the firewall. Its never been bolted on. It also comes with a mint manual brake pushrod, and a new rubber pushrod retainer. I'm asking $45 shipped to the lower 48. All my...

Here is a set of Mopar Performance pn P5249151 .920 diameter torsion bars for a-body cars from 1964-1976. Mopar describes them as "performance handling, solo racing", but I bought them because I thought the larger bars were overkill for what I wanted to do, yet I still wanted a firm, more...

I have a Moroso pn 20710 8qt oil pan that I'm not going to need in the foreseeable future, along with a Moroso pick-up, pn 24700, and a Mr. Gasket Ultra-Seal gasket set, pn 5895. These will fit 273, 318, 340, and 4" stroke variations. The oil pan and pick-up are used, but in very nice shape...

Well guys, looks like I will be liquidating my mopar inventory. I hate to do it, but my fiance and I are going thru some relationship troubles, money troubles, you name it. Family is more important, so, here goes. I bought this shortblock used from a guy that was just wanting to go bigger...

Selling my Holley 750 cfm double pump carb, list# 4779-3. Its in really nice shape, I just finished going thru it and installing a trick kit (needle/seat assemblies, gaskets, seals, accelerator pump diaphrams, etc.) All surfaces were checked for flatness, everything was soaked, scrubbed, and...

Selling my Holley Strip Dominator that I had set aside for use on my stroker. I'm only selling it because I am now using W2 heads, and this intake is for std style ports. This intake is in great shape, all the threads are good, and its never been modified or gasket matched. It has the...

Up for sale is my Edelbrock LD340 intake. It is in great shape, never ported. I glass bead blasted it about a year ago, it still looks awesome. It has some tiny pits where the t-stat housing goes, you can see them in the pic. It has the outer carb bolts heli-coiled, along with the thermostat...

I have a set of new, in the box, Mopar Performance valvesprings pn P2806077. The description MP gives is 1.83/1.86 installed height, .500/.610 lift, dual w/damper, 1.52 OD. I am pretty sure the installed ht is what B/RB and Hemi engines use. I was going to keep them for my W2 heads, but with...

I have 2 Magnum roller cams that I will never need, they are great for either a stock rebuild or send them to Bullet, etc for a regrind--cheap! $20 each plus shipping from 44413. Some other magnum parts I dont need: --360 truck pan $15 --timing cover $15 --2 sets of valvesprings, retainers...

I have some never used, original Mopar Performance mushroom solid lifter that I will never use, pn P3690137. I just got them this past weekend, and at the moment I only have 15. The guy I bought them from said the box they were in had spilled and he must have missed one, he won't be back up to...

I got some misc big block gaskets I wont be needing, including some rubber valve cover gaskets, oil pump, seals, water pump (not pictured). You get all the gaskets in the picture plus the water pump gasket for $16 shipped in the lower 48. Good deal. Send me a pm, and make them yours! Located...

I have a set of main caps with bolts from an early 70's 360 that I will probably never need. The bolts aren't in the picture, but I have them and they are just as nice. These came from a fairly low mile engine that had a cracked block. I am asking $50 shipped in the lower 48, and they are...

I have 3 bb rear main seal retainers for sale, asking $15 each shipped to the lower 48. I didn't clean them off or anything, they are all 3 in nice shape and have the same part number. Located in East Palestine, OH 44413. Send me a pm!

Big Block Mopar rod bearings, pn CB527P-10, for cranks that are cut .010. Set of 8, enough for one engine. $50 shipped to the lower 48. They are located in East Palestine, OH 44413. Send me a pm!

Got a 3-bolt double roller timing set, never been used. Came from a retired racer, he is pretty sure it is a cloyes set. It will fit any bb mopar with a 3-bolt cam. Asking $50 shipped to the lower 48, its located in East Palestine, OH 44413. Send me a pm! *

I have a new, never used Melling hi-volume oil pump for big blocks, pn m63hv. I'm asking $50 plus shipping, summit lists it for $76. Located in East Palestine, OH 44413. Send me a pm!

I have to let go of the nicest clutch pedal/linkage set-up that I have ever owned. I took this out of a 1968 Dart, but it will bolt into any 67-76 a-body. I would rather sell it all as a whole package, but I will throw some individual prices out too. I was trying to save this for my 4-speed...

I have this flywheel I have been tripping over and I just want it out of my way. It is from a 1966 Valiant slant 6 that only had 44K miles on it I had parted out because of rust. It is the 9" (I think that is the size, it is the small one that the slants and 273s got for a few years.). It can...

As much as I hate to sell it (would have been alot of fun in my 68 Dart project), I want to get the darn thing on the road. Up for sale is my ACC Street Bandit torque converter, pn 53053. It is for non-lockup 904 transmissions, and is rated at 3200-3600 stall speed, depending on your...

Here are some parts I collected when I had my 1966 Valiant, before I realized how rusty it was. ----10.5" OAL clutch fork, matching pivot, both for 9.5" clutch/bellhousing, glass bead blasted $50 ----Adjusting rod, nut, fork grommet, 7" OAL, glass bead blasted $15 ----OEM low-mileage B&B...

I have more of these than I need, so here they are. SB electronic distributor with a fairly new pick-up. It is out of a 73 or 74 360. Super clean! The only thing wrong is the little plastic bushing at the bottom has a chip, but those are cheap, easy to find, and easy to change. The oil pump...

More stuff I'm not gonna use. Took this off of a 1996 5.2 (318) magnum. Glass bead blasted, painted the steel, etc. All of it is in nice shape! Includes the timing cover, crankshaft pulley, idler pulley, tensioner, brackets, and the alternator+a/c compressor (if the buyer wants them, they...

This is just in my way, and I will never use it. It is from a 1996 318, and is in really nice shape. No groove, no cracked, slipping rubber. Ready to bolt on, I'm asking $20 plus shipping from 44413. I am in eastern Ohio, right on the border with PA, and I still have the block/crank that...

I have a set of Mopar Performance Hydraulic Roller Lifters for 5.2/5.9 (318/360), part number P5249862, and is a set of 16. They retail for about $125 pretty much everywhere, but I found out when I was looking up the price that apparently most places are out of stock/backordered. I am asking...

I have a set of 340 torsion bars that I forgot I owned. I just installed a set I purchased from another member and I found these while moving. They are in nice shape, I just don't need them anymore, and I don't have a garage or storage space. Not rusty or nicked, or scratched, etc. Asking $120...

More parts here that I would rather sell than move to yet another house. All of these are from the same vehicle, a 1966 Valiant 100. It only had 44K miles on it, so the parts were in nice shape to begin with. I glass-bead blasted most of the parts, so you won't have to deal with...

I've had these lying around for long enough, I am moving, and I really don't want to take them with me! All of it is off of a 1997 318 (same parts for 318-360, 5.2-5.9). -Timing cover, glass bead blasted -Aluminum Alt-a/c bracket, glass bead blasted -Lower ribbed pulley, glass bead blasted and...