Search results for query: *

I have for sale a pair of what looks to be, Top Street Performance fabricated aluminum valve covers for the small block LA engines. These valve covers have very little run time on them are near perfect. Included is a PVC valve for the one side and a Mr. Gasket push in breather, P/N 4029G for the...

I have for sale a fairly new, very little used Dorman aftermarket replacement small block LA timing cover P/N 635-400, for the later, aluminum water pump applications. This timing cover is very clean and is painted. Dorman 635-400 Dorman Timing Covers | Summit Racing. The four lower attaching...

I have for sale a pair of used Edelbrock Performer RPM closed chamber aluminum heads P/N 60775. These heads are clean and in excellent shape. Ready to bolt on. https://www.summitracing.com/parts/edl-60775 In addition to the complete heads, I am including a set of ARP PRO head studs P/N...

I have for sale a very little used MSD Pro Billet distributor for the small block engines P/N 8534. It’s in excellent shape and has been sitting on the shelf for a while so it’s time to sell. It worked perfectly when on the engine. https://www.summitracing.com/parts/msd-8534 Also include with...

I have for sale a pair of 340/360 A-body engine mount brackets and biscuit mounts that will fit the 67-72 A-body cars. These mounts were in a 1968 Dart bracket car. The driver side biscuit mount is the OEM rubber design and was used in conjunction with a torque strap while the passenger side...

I have for sale a very little used Proform 750 cfm polished dual feed, double pumper carburetor. It’s in excellent shape and can be used right away. https://www.summitracing.com/parts/pro-67200 In addition, I have a very nice Mopar Performance single plane intake manifold for the SB LA...

I have for sale a used CSR small block LA, blue electric water pump. It works perfectly and has all the attaching hardware, front cover gasket, the backing plate, fuse and on/off switch. https://www.summitracing.com/parts/csi-903nc https://www.summitracing.com/parts/csi-903plate-c I would...

I have for sale a used CVR billet thermostat housing P/N TSH6CL. It is the swivel hose inlet design so can turn any direction based on the upper hose position of the radiator. https://www.summitracing.com/parts/cvs-tsh8cl It’s in perfect condition and has the O-ring design for sealing to the...

SOLD pending receipt of payment. I have for sale a very little used ATI SFI certified small block front balancer that came from an internally balanced 360/408 stroker engine. It has 5 passes on it and about 9 dyno pulls. ATI Performance Products ATI917392E ATI Super Damper Standard Harmonic...

I have for sale a used Mini starter from Summit Racing, P/N SUM-820441 that’s in excellent shape. The car was rarely raced so very little time on it. Summit Racing SUM-820441 Summit Racing™ Mini High-Torque Starters | Summit Racing It was bench tested and works perfectly. I am also including...

I have for sale a used B&M SFI certified flex plate P/N 10230 and fits any big block or small block engine using the 727 trans. There are no issues with this flex plate and it comes with ARP PRO 12-point attaching bolts. https://www.summitracing.com/parts/bmm-10230...

I have for sale a gently use Moroso #64700 aluminum crank pulley that was on a 360 Bracket engine. It has the offset attaching bolt positions (pre 1972), measures 5” overall diameter and 2 ¼” deep. Moroso Cast Aluminum Crankshaft Pulleys 64700 Even though this pulley has the one offset bolt...

I have for sale a set of used OEM 8 ¾ ring and pinion gears for the 741 case. They look to be in excellent shape and just shows some normal wear. The inner pinion bearing shim measures .091” with the case that it came out of so that would be a good starting point for measuring pinion depth. I...

I have for sale a used Edelbrock 1411 carb with the electric choke. It’s the 750 cfm model but from what I can see, the primary throttle shaft has a little more than normal play in it as it goes through the main body bores so may need to be bushed. It did run well when it was on the engine but...

I have for sale a set of used main caps that came from a 318 engine. They are all in excellent shape and have been cleaned. The bolts that were used on this engine were a mismatched set so I’m just including the correct ones that I found. The oil pump attaching bolts are also included. These...

I have for sale a set of 8 used Silv-O-lite .060 over, cast pistons P/N 1279 that came from a 360 LA engine using the stock 3.58” stroke. Silvolite S1279-060 Silv-O-Lite Cast Pistons | Summit Racing These pistons are clean and come with the matching pins. Each pin was put back with its...

I have for sale what looks to be an MSD extension cable with 4 different color wires in a plastic covering for the 7AL ignition box. Red for switched power, Orange for coil +, Black for coil –, and White for points or original ignition amplifier. One end has the end connectors to go connect...

I have for sale a pair of gently used aftermarket SBP, 8 ¾, A-body axles from Dutchman. These are the stock length 27 11/16” axles, with ½ x 2” screw in studs, OEM adjustable bearings and stock 30 spline ends. These axles were taken out of a 1969 Barracuda so will fit any of the A-body cars with...

SOLD pending receipt of payment. I have for sale a new, never used engine oil filter relocation kit that I believe is a Trans Dapt # 1113 Trans-Dapt Performance Products 1113 Trans-Dapt Performance Remote Oil Filter Relocation Kits | Summit Racing It’s complete with all the fittings and...

I have for sale several lengths of used stainless steel braided fuel line with female AN fittings already attached. Here is the list: 1 -8 line with female AN fittings on both ends. 17” in length end to end 1 -6 line with female AN fittings on both ends. 15 ¾” in length end to end 1 -6 line...

I have for sale a set of 3 clutch cross shaft (Z-bar as most folks call it) nylon pivot bushings. These are the bushings that cup the balls on each end of the round part of the shaft. Unfortunately, I only have three of them. Two are used and the third one looks to be new. I would like to get...

SOLD pending receipt of payment. I have for sale 6 of the cupped SB exhaust manifold washers. They are all in great shape and not all rotted. I would like to get $5.00 for all 6 washers plus the shipping. Ken Edison, NJ

I have for sale a used BB NON-AC single groove water pump pulley that’s in excellent shape, has been cleaned and painted. It measures just under 5 ¾” in overall diameter and 2 ¾” deep. I would like to get $12.00 for it plus the shipping. Ken Edison, NJ

SOLD both sets pending receipt of payment. I have for sale some NON-OEM small block intake bolts and washers and NON-OEM small block engine mount bracket bolts, washers and nuts. They all came off of a badly damaged and unusable 340 engine. Everything is clean with all the threads in excellent...

SOLD pending receipt of payment. I have for sale a set of 4 used OEM 340 windage tray main caps bolts. These are the correct bolts to attach the windage tray to the main caps. They are in perfect shape and have been cleaned so ready to install. I also have some bolts that attach the windage...

I have for sale a set of 8 used Silv-O-lite .060 over, cast pistons P/N 1279 that came from a 360 LA engine using the stock 3.58” stroke. Silvolite S1279-060 Silv-O-Lite Cast Pistons | Summit Racing These pistons are clean and come with the matching pins. Each pin was put back with its...

I have for sale a set of used main caps that came from a 318 engine. They are all in excellent shape and have been cleaned. The bolts that were used on this engine were a mismatched set so I’m just including the correct ones that I found. These caps can be used on any of the 273, 318 or 340...

I’m selling this distributor cap/rotor kit for a friend of mine. He ordered the wrong kit. This kit is a NEW Summit G5223 and fits the Mopar MSD BB and SB Pro Billet distributors along with any of the GM points style distributor applications. The cap has the female design socket ends for the...

I have for sale a used but in excellent shape, carb throttle return spring bracket. It looks to be an OEM 2-bbl 318, 360 application but was taken off of a 360 Holley 4 bbl engine, I believe the only difference is the throttle return spring length. It’s been cleaned and has a coat of primer on...

I have for sale a set of new collector tether cables and clamps that were for a 440 project that was never finished. This kit consists of 2 cables, 2 primary tube clamps and 2 collector clamps. These parts were never installed on any headers and is still in the original packaging. The cable...