Search results for query: *

Looking for a set of a-body buddy seat mounting brackets. Thanks in advance!

Looking for an ashtray for an a-body console. Thanks in advance Thanks fabo family, part located.

Looking for a pair of 15x7 small bolt pattern (5x4) steel wheels. Thanks in advance

I'm looking for a pair (2) of original bolts and washers used to mount the Kelsey Hayes disc brake caliper to the spindle. I've included a photo of what I'm looking for. Thanks in advance for helping.

I'm looking for a pair of nice original front dark green armrest pads for my 1968 Barracuda.

Looking for the spring shown on the mounting post of this console tach. Thanks in advance.

I'm looking for the small spring that is used on the mounting hardware on the console mounted tach or vacuum guage. Pics show the spring I'm looking for. Thanks in advance.

I'm looking for used but nice trunk light switch for my 1968 Barracuda fastback. Can anyone help? Thanks in advance.

Hoping someone can help. I'm looking for the small rod that goes from the hood release mechanism to the hood lock mechanism for my 1968 Plymouth Barracuda fastback. Thanks in advance.

I'm looking for nice dark green interior parts for my 1968 Barracuda. Below is a list of what I'm looking for. Sunvisors All 3 dash pads Front armrests Complete set of front and rear seat belts for a bucket seats Front and rear door panels Console All parts must be dark green and in nice...

I'm looking for a good used Hurst 6350 shifter mounting pad and the three screws used to mount it. Thanks in advance for your help.

I'm looking for a vacuum guage base used to mount the guage to a console. I also need the spring. Thanks on advance for your help.

I'm looking for a mint set of dark green front armrest pads for my 1968 Plymouth Barracuda.

I'm looking a clean transmission dipstick tube for a small block 727 transmission. Must be from a small block 727. Thanks in advance.

I'm looking for a 1968 radiator part number 2898031. I want a radiator that has the number stamped into the top tank, not one that has the number stamped onto a tag that is soldered onto the tank. Thanks in advance for your help.

Looking for a clean and straight 2863215 18" fan blade. Thanks in advance.

Would anyone have a good pair of original nuts and washers for the lower control arm pivot pins they could spare? Also looking for a good used pair of original lower control arm bumpers with the mounting nuts. Thanks

I'm missing a single main cap bolt with the provision for the smaller windage tray attachment bolt. Someone must have a single good used one they can spare. Thsnks in advance for your help.

Looking for a correct and complete bumper jack for my 1968 Plymouth Barracuda. Thanks in advance and thanks fabo

Looking for this exact water pump tensioner pully for my 1970 Dart Swinger 340.. This pulley and bracket are used to apply tension on factory equipped a/c cars without power steering. I'm fairly any 1970 small block with factory a/c and manual steering will have this part. This is the very last...

Seeking this exact water pump belt tensioner pulley and bracket as pictured for my 1970 Swinger 340 factory equipped with air conditioning with manual steering so that I can finish up the restoration of my car. Can anyone help? Please check your parts stashes or parts cars. Thanks in advance for...

I'm looking for an idler pulley and bracket for a 1970 Dodge Dart Swinger 340 with manual steering. I'm fairly certain the same part was used on the 318 cars. Thanks in advance for your help!

LooKing for some original working square/rectangular style flashers for my blinkers and emergency lights. I believe there are two of them. This is for my 1970 Swinger 340. These mount in the factory style rectangular clips, one on the clutch/brake pedal frame and the other somewhere in the dash...

Looking for a nice uncut rallye dash wiring harness for my 1970 Swinger 340. Must be.complete with no melted terminal blocks and no cut wiring. Does anyone know if this harness is reproduced?

Please help!, Ready to reassemble my door and quarter regulator and I need a nice piece of clear drivers side door glass and a nice piece of clear drivers side quarter glass for my 1970 Dodge Dart Swinger. No scratched or chipped glass as I already have that... Thanks in advance for any help.

Looking for a set of clean vent window glass for my 1970 Dart. Must include the channel that the glass is mounted in and the channel must be in very nice condition. Thanks in advance for your help.

I'm looking for a pair of front sway bar bushings for the sway bar on my 1970 Dart Swinger 340. Not the end link bushings but the bushings that are triangle shaped on the sway bar itself. Can anyone help? Thanks in advance.

Looking for two factory correct upper shock stud trunk nuts. These are the nuts that are located inside the trunk that hold the shock studs in place. This is for my 1970 Dart. Thanks in advance.

I need one oval body plug that mounts below the lower rear side windows, one side of my car is missing this plug on the drivers side. I believe the plugs are the same on both sides. Must be someone parting out a Dart with one of these plugs. This is for my 1970 Dodge Dart Swinger. Thanks in advance.

Help! Looking for a N.O.S. grill for my 1970 Dodge Dart Swinger 340. I would accept a perfect used grill with no repairs, chips, cracks, etc. Must be perfect and ready to bolt in condition.