Search results for query: *

Hello Folks I hope all is well. I am installing a new wiring harness from Rebel Wire and I am having a hard time wrapping my head around the use of the exciter wire. The exciter wire goes straight to the fuse block. From what I can understand is that it simply relays voltage back to the...

A few days ago I lost my keys and used a newly cut spare to move the car out of he garage for a few minutes. Went to move it back in and it wouldn't start back up. Jumping it across the starter relay it fires right up. I get 12v to the ignition switch but nothing when turning the key to ign. I...

Here's a step by step disassembly of one of the "Ready to Run" HEI SB units. (Continuous Edit so please be patient) Remove HEI Cover and unscrew Vacuum advance. Remove ruber wiring grommet to gain access to vacuum advance lever Look inside (where green wire is in picture) and you...

Hi Gang, hope all is well. I am absolutely stumped (as usual) with my fuel gauge. It is an Auto Meter #3315 with 73ohms (empty) and 8-12 ohms (Full). The gauge worked with my previous tank and sending unit. This is a new tank and sending unit. I pulled the tank today and tested the sending...

Hi All. This morning I have been sifting through thread after thread on Ballasts, Coils, Voltages, etc.. I think I have most of my answers but wanted to start a thread for the next guy who comes along and does a title search for Ballasts, Coils, or Regulators. Any advice on what could be wrong...

Hi All, I'm rewiring my engine bay and am stuck on the starter relay posts. I have everything but the wire to the firewall block and the neutral safety switch left and have two posts to choose from. Which relay post on the top of the relay is for the neutral safety switch, left or right...

Hi all. Sorry to be redundant since there are several threads on the electronic ignition upgrade, but all the ones i have read have been about post-70 vehicles, or have ended up in a several offshoots as to what ignition is better etc.. I get confused easily. I guess to simplify: If I...

I am stumped. I pulled the instrument cluster out and forgot where this little cylinder was attached to. Do you know what it is and where it went. My wiring diagram doesn't show it. Thanks in advance.

The needle on my OPG is buried to the left and doesn't move. I replaced the Sending unit and nothing changed. I am pretty sure the gauge is dead but hate driving the car with the slim possibility that oil pressure could be low or nill. So my question is: When the key is in the on position does...