Search results for query: *

These are the older big block tall valve covers with some decent chrome left on them. I would use them on a clean driver type car myself. They still shine nice. Little surface rust on the inside as shown in photo. 120.00 shipped within the states. Have PayPal.

New set of crane ductile iron adjustable rockers for big block. 1.6 ratio. 320.00 shipped.

This is a pair of 73-76 upper control arms complete with cam bolts and useable ball joints. The rubber boots should be changed as the pickle fork did them in during removal. 135.00 shipped to the lower 48 states.

Two pair of Braswell custom metering blocks built from new Holley HP blanks. Photos show the quality of work peformed on these tuneable blocks . These have some age on them but have never been used. 150.00 shipped to the lower 48 states for both pair.

This cap doesn't appear to have ever been used. I have had this a very long time. Forgot I had it and found it in a box while looking for a different part. Unsure if repo or original. It is different than the recently purchased repos I have on my covers now. This cap pushes down on the stand...

These B-body HP manifolds have casting#s 2806900 Right 2843992 Left I understand they can be used as a lower cost alternative to headers for an A-body big block swap. That was my plan for them till I got some tti headers. I haven't gotten around to fitting them in a BB A- body to prove it can...

These new spindles are correct for the 73 up big bolt disc conversion. These slider type caliper brackets use the 11 3/4" cordoba rotors which require a minimum 15" dia. wheel. The upper control arms are the correct used take offs to work with these spindles on a 67 up car. 350. for everything...

200.00 for the pair. Will not fit the 64-66 early a bodies.

I don't know what transmission I took this off of but perhaps someone will recognize and be able to use it. 25.00 shipped to the lower 48 states, a bit more out of country.

For sale 1975 big block 727 transmission. This is a good working trans with 34,457 original miles on it removed from a motorhome. I drove it on several trips without problems before pulling. Not the funky short tail with the emergency brake drum. It uses the standard slip in driveshaft. It...

New crane cam and federal lifters $175.00 shipped to the lower 48 states.

These hooker headers have some dings and wear to the thermal coating from use. Great performance headers for a drag or driver condition car. I didn't clean them up. They are as removed from a 70 charger. 2" tubes with 3 1/2" collectors. $150. or best offer. Buyer pays shipping.

Used part $300.00 shipped in the lower states. A bit more elsewhere.

Crank pulley is new never bolted on. Fits small and big block. 5"-30% under drive. Alternator pulley is used $75.00 for both shipped in the states. A bit more elsewhere.

New never used. These are very firm box says urethane but feels like delrin or nylon to me. Firm Firm Firm. Did I mention these are firm. U.S.A. made and look to be of very high quality. What I would call a solid bushing with no deflection. Drag race or cornering applications. 25.00 shipped...

These are from the 70s. Made by Kelsey Hayes these adjustable brake proportioning valves were sold thru the direct connection performace parts catalog over the dealership parts counter. I have two of these both in used but good working condition. Selling individually. 70. ea. shipped within the...

Nice 4 corner idle carb. Only used for a short time. Taken apart and washed clean of fuel with carb cleaner before being reassembled and stored. Genuine Holley accessory chrome parts were added when it came out of the box new. It has been sitting but should be ready to bolt on. I wouldn't...

Sorry about the bad picture. 300.00 ea. for local pick-up.

Will work in 67 and newer. Good working condition. Uncleaned take out as shown. 185.00 shipped.

Used part cleaned and painted. Working part with some wear from normal use. 60.00 shipped.

Correct for Hurst Hemi cars. 75.00 shipped.

These are an older set and not seen much. Thought someone may want them. 85.00 shipped to the lower 48 states.

Used driver quality take offs, not show chrome. Has scratches and pitting from use. Still shine nice. They looked good on the car. But have some imperfections. Comes with new bolts and caps. Used pcv. 100.00 shipped to the lower 48 states.

50.00 + shipping

350.00 + shipping unmodified race hemi 250.00+ shipping modified race hemi cut thin for elephant ears and pulley line up.

This is a 70s era NOS chrome six pack air cleaner from the direct connection catalog great shape with new factory correct fram filter. The carbs are also from the same era and catalog. They are used but complete and will only need a fresh rebuild. These carbs have mechanical secondary with...

Used hooker fender well headers with bolt on collectors. 225.00 + shipping

Used pair of aluminum Max Wedge port Indy 440-1 heads. Removed from running engine. T&D rockers and comp cams springs retainers pushrods and lash caps. 1500.00 + shipping

This is the flat base style that is made for the standard Holley size carb neck. Clean used part with a new unused 4" filter. 25.00 shipped to the lower 48 states.

Homemade from 1/2"thick aluminum. This is to mount the lightweight modern 2-bolt aluminum master cylinder to the 4-bolt studs on firewall. Was working fine. I just went back to the original Iron master cylinder. 15.00 shipped in the lower 48 states.