Search results for query: *

Here is a fresh 71' 440 HP2 block. it has been bored .040 over and is ready to build, i have the main caps in a box with bolts. I also have a std. steel 440 crank, that has not been checked. $1,000 + shipping located in Bremerton WA. 98311 will drop at local Fastenall. paypal ok buyer pays the...

I have a 1972 cast 340 block with 73 vin fresh .030 over. and its original cast crank with a fresh grind as well. I also have the correct heads for a 73 340, they were rebuilt and run for a couple of years have hardened seats and are complete and assembled. I have the floating rods and some used...

Here is a factory 26" a body radiator. my numbers book says it is for 1974 model, but it says 70 dart in sharpie on the top tank. so i think it shout work in any 67-76 model a bodys. not sure of its condition inside. it has 2 cooling rows. the shroud is perfect. i didnt see a part number on the...

MoPar 340 bell housing a-833 $175 located in Bremerton WA. 98383 local pick up is welcome paypal ok +3% and shipping

Crane Gold Race Pro Series Shaft Mount Rocker Arms and shafts. this has everything to install. These are no longer available but cost $500 when purchased about 10 years ago. https://www.summitracing.com/parts/crn-64790-1 $400+shipping. I can fit this package into a $20 flat rate box. located...

I have 2 new washer pumps. one is from year one and has its packaging and is what it is. $20 this other is very nice quality looking part and comes with a filter, but it has no identifying marks and has no labels on its box. again holding it next to the year one piece its obviously built better...

CAT PERFORMANCE ENGINE PRODUCTS RKE 440A1.7 i do not know anything about these other than the obvious. new in the pacage 1.7 ratio roller rockers for b/rb engines. i found an expired ebay listing for the same parts for about 180$ i think? $150 + the ride located in bremerton wa.

67 date coded small block timing cover with no timing marks.#2128896 $35 440 6pack rods polished and prepped. #2951908 $250 big block truck oil pan #4027236 $50 340 windage tray original unmolested $50 carter avs #4966s 1971 440hp auto $100 383 400 440 heads 346 casting, have been rebuilt but...

I have a single head for sale. it has been rebuilt. it is correct for 1973 340 or 360. it has new stainless valves 1.88/1.60. has been professionally rebuilt by Ali's machine in LONG BEACH CA. pm me here with any questions. asking $200 local preferred but shipping is possible.

Here is a electric K-LINE magneflux machine. This needs to go to a home where it will be used. I have had it for a year and never used it. I have 2 big bottles of different grit powders for it, and may have some other small bits with it, but have not found the other box yet, so i may not have...

ATTN: so. cal members, I am moving in a month and have started to clean my garage out. if anybody needs a spare starter or alt. i have several working of each that will go in the trash if not picked up in the next couple of weeks. FREE I also have alot of parts i will be selling, but will be...

Here is a drivers side valve cover for a 340. i am not sure what year it is from maybee 70? It has some dents and needs some love from a body man. It is located in long beach ca. 90802 local pick up preferred. $25 plus the ride please pm with questions

Here is a NEW rear wheel cylinder from CONI-SEAL. part # WC13597 bendix part #33597 New in the box, although the box is pretty beat. The part is new and looks to be fine. Located in long beach ca. 90802 paypal ok, $10 shipped.

1) A matched pair #2658920,66-67 273/318 sold! 2) 2 pair of (1pair fresh, 1 pair cores)#4323302, 85-86 318 fast burn $250(fresh) $150(cores) 3) 5 pair plus 1 single "J" #3418915, 71-72 360, 1:88 $100ea. cores 4) 1 pair...

Here is a big box labeled HEMI GASKETS. it has about 4 open gaskett sets that look to be complete and open because the boxes are deteiriated? there are tons of gaskets in the big box, as soon as i get some bench space open i will go thru them and figure out how to box the back up. Located in...

Here is a complete set of used 360 pistons with rods. std. bore 4" they are dirty but the skirts look pretty good to me, I can still feel the machining marks on them. located in Long Beach CA.90802 $100 + ride, Paypal ok.

Here is a used but nice timing cover for small block mopar 1970 and up. no wear or pitting, needs cleaned. mopar # 2951698 Located in Long Beach CA. 90802 Paypal ok, $45 shipped

Here I have a few more center sections for sale. All are + shipping and located in Long Beach CA. 90802 Paypal ok, #1) 742, 3:23 pegleg. $150 #2) 489, 3:23 pegleg. $125 #3) 741, 2:76 pegleg. $100

I have various blocks for sale. 1). 1975 360 std. bore $150 2). 1977 360 std. bore $150 3). 1972 318 std. bore $100 4). 1965 273 std. bore $100 will add pix tonite located in long beach ca. 90802 local pick up prefered but will ship. cash or paypal. I also have tons of heads i have not...

Here is a cast thermostat housing i went thru and made like new again. It has been sitting on the shelf for a few years and the paint has chipped in a few spots. Located in long beach ca. 90802 $14 shipped, paypal ok

Here is a giant aluminum radiator. i was planning on using this in my demon, but it is gone now so like the rest of my parts it is for sale. 26" wide, 28.5" total width. 17.75"tall, 23" tank to tank, 24" to the cap. I think this is meant for a B or E body, but it can be made to fit an...

Here is a black edelbrock breather, I dont think I ever used it. It looks to be new, but dont remember for sure. Located in long beach ca. 90802 $12 shipped paypal ok.

Here is t-stat housing that used to be on one of my motors. its pretty clean and could polish even nicer. located in long beach ca. 90802 $15 shipped paypal ok

Here is a vented cap for a power steering pump. located in long beach ca. 90802 $10 shipped, paypal ok, or postal m.o.

Here are a set of main cap bolts for windage tray motors. small block app. I dont have the small bolts that go in the ends. but i dont think they are special. located in long beach ca. 90802 $15 shipped to lower 48. paypal ok, or postal m.o.

Here is a complete running 318. it is a 1974 motor. I bought this engine a couple of years ago to put in my dart, but ended up getting a great deal on a fresh 318 so i ran that instead. still has an electronic distributor, water pump and alt are still there. it was in a 4 speed car so it has...

Here is a used but nice Lokar kickdown cable, from a 1969 d100 w/360 727 I pulled this and a bunch of good stuff from the pick a part I dont even have a car anymore so i am liquidating all parts cable is 60" long and housing is 51" long still has mounting brackets attached located in long beach...

Here is a new voltage regulator that is for race applications. constant output. part number p3690731 located in long beach ca. 90802 $20+$6 for the ride paypal

Here are the shackles from my old 1967 plymouth valiant signet. Not all rusty or pitted, just dirty n greasy. Located in long beach ca. 90802 $25+$6 for the ride paypal

Here is a pair of clean shock plates. These came off of a 69 barracuda with 8 3/4 rear end. located in long beach ca. 90802 60$ plus the ride