Search results for query: *

I am starting another engine build for my 170, 210 little big engine. I want to find another intake for the build process. I have to build headers and lots of little bits. Does anyone have a line on an intake that is for sale. Don't need the carbs, but that is not a deal breaker. Thank you...

I need some levers, here is what I need: These are the numbers stamped on the levers: 3894 10, 3-4 4329 (1 or 4 or rust?) 1-2 Also I you have any of the reinforced shift rods I would like to hear what you have. It would be easier to modify that build them from what I am finding for tube and...

I am starting another engine build for my 170, 210 little big engine. I want to find another intake for the build process. I have to build headers and lots of little bits. Does anyone have a line on an intake that is for sale. Don't need the carbs, but that is not a deal breaker. Thank you slanters.

Kind of a long shot. I am looking for loose parts for the DCOE series of Weber 2 Barrel Carbs. I want to get a stash of jets, tubes, chokes and such to tune my carbs. Please contact me if you have any you want to sell. One real problem is I need 6 of each to tune the slant! (Ouch) Thanks

Does anyone have a METAL gear for the pump motor they can part with? I bought a new kit a couple of months ago and it has a plastic gear. The front on the gear popped of, it's just super glued on. I glued it back, but IF there is a metal gear, I would like that. I can buy a clapped out system if...

Anybody have any rubber style valve cover gaskets for the solid lifter slant covers? Not looking for CORK. Let me know if you have any you want to sell. Thanks!

I have a 67 vintage block that I was messing around with today. I had picked up the block a number of years ago. I had a set of standard bore low compression pistons laying around, so for grins I just looked to see if they would fit. Dang if they didn't slip right in. I didn't do any...

Anyone help me with a vendor or source for a Carter Tag? I have the correct carb, want to get a tag made. Thanks!

I am looking for a set of factory slant six Hyper Pak exhaust manifolds. Not Dutra, Aussie Speed or home made. Any leads appreciated.

I would like to purchase only the drivers side manifold. Doesn't have to be perfect. I am located near DFW Texas, 76065. Please include some pictures and price shipped. Thank You.

Anyone have this part they can spare? It comes in the bellhousing kit, I did not get this part in my kit. The kit is not being sold anymore.

I am in the header fabrication phase with my race car. Does anyone have any headers they want to sell? I have to cut them up and modify them. I would rather start with some Cliffords, but what do you have? Thanks!

I am looking for good 198 cranks. Please contact me if you have a good usable crank shaft. Please start a conversation if you have any. Needed in Dallas Texas. Thank You.

I need a passenger side windshield wiper pivot assembly. I haven't removed mine yet, but I heard a pop and it is no longer turning. All the rods are still connected under the dash, so I guess the shaft sheared internally. Anyone have one they can sell?

Hey I need the retainer and bearing, anyone have a set they can sell? Please contact me if you do. I have a B Body main output shaft I am selling if interested. Thanks

I need a good A Body Main Shaft, NOT OD BOX!!!! It's going to be about 23 inches long, and have 30 splines. I have a B Body 4 Speed Main Shaft to Trade if needed. Please send me a PM with your price if you have one. Thank you.

Wanted complete carb or parts. Any condition. 1961 Valiant or Lancer Power Pack 170 Cu In, 148 HP.

I am having a hard time locating refills for my wiper arms on my 62 Dodge Lancer. I have a nice set of ANCO arms but need the rubber blades. These Lancers use an arm that has a Nut style attachment to the shaft so you can't change the arm to another style. They are the polished stainless steel...

Looking for a complete carb or any parts of one. 1961 Valiant Lancer 170 Power Pack. Pictures and price please.

I need a chrome breather with out the nipple to air cleaner fitting. Slant Six chrome cover. Does anyone know an application that I can use to buy one? Does anyone have a new one to sell? Thanks! Near DFW Texas.

Does anyone have one of these they want to sell? I need it for a 1962 Dodge Lancer. Not sure if they are all the same for all the wagon years. Located near DFW Texas. Thanks

I need this for my 62 Lancer, but I believe it is the same 62-64ish? The throttle shaft from gas pedal to carb. It's a 3 inch long rubber seal, goes through the firewall and fits in the little 3 bolt bracket. Mine is ripped. Anyone know a new source for it? Anyone have a good used one? I am near...

I am looking for a small block tunnel ram for a project I want to do. I don't need a top so if you have part of one that would be perfect. A TR-5 or Weiand would be perfect. It's going to get cut so if you want your parts to go to a good home, you might want to keep them. Located near DFW Texas...

So who knows where these parts walk away to, but they do. I have the steel blocks but I need the 2 bolts to adjust the front T-bars on my 62 Lancer. These are fine tread, not coarse, 9/16 x 16 TPI. Round head to fit into the adjuster socket. Just need to be usable. I have the steel blocks but if...

I am looking for a nice 67 Coupe with a 273 Commando, S or non S. Or a 76 Dart Lite. Don't want rusty buckets or project cars. If you have nice cars let me know. I don't know why you can find a 67 383 car, but the 273 cars seem to be gone. Just send me a conversation if you have something good.

I need a slant six alternator mount. Anyone have one they can part with? Please PM Me.

I need a straight Passenger side large upper control arm. Please PM me if you have one for sale at a reasonable price. Need it shipped to DFW texas.

Folks I need 2 manual trans braces. This bracket runs from just below the starter to the bellhousing. Must be a manual, auto is different. Has a boss for a return spring. This picture shows the bracket. THANKS! Please PM me if you have one or more to sell.

I am looking for a re-buildable 273 in east Texas, or OK. Is one out there? I will also consider a 318 0r 360 roller block. Cash waiting, give me a shout.

Does anyone have One Small Bolt Pattern Aluminum Slot wheel to sell? 14 X 5 or 5.5 or 6. Need a spare for my wagon, Narrow the better, condition, just needs to hold air I can make it pretty enough for the spare well. Any one have one? Thanks FABO