Search results for query: *

Looking for a nice set of Schumacher big block A-body tri y headers Tampabay, FL Greg

Looking for a nice 1969 Dart convertible GT to purchase spring 2023. Would consider a 1968 but 69 preferred; no rust buckets, white interior and factory AC . Driveline not a factor, unrestored would be nice so I can do so work on the vehicle. Located in Tampabay FL, so would like to find in...

Looking for the alternator brackets for 1967-68-69 A/B/C small block. Don't really need the bolts but do need the triangle & long adj bracket Want to save some $$$ and not buy repops. Let me know what you have, condition & price. Shipping to 33710 St. Pete, FL or can pickup if close - Greg

I picked up some small block 1.5 roller rockers and need the following new or used - SB pushrods for adj rockers (has cup end) and - aftermarket SB rocker shaft hole down set Also looking for - 1967-68-69 SB dipstick & tube Located in St. Petersburg, FL - Greg

Looking for CC XE268 cam new or used - or something close. 67 318 build, 86-89 heads milled, 9.2:1 CR w factory 340 4bbl intake & AVS and 340 HP exh manifolds. LMK what you have, condition & price. I have new lifters but would take matched set w cam

1968-69 Small Block timing chain cover with timing mark on Pass side Mopar part number is 2946797 Looking for reasonable price, flat w/o stripped threads. LMK your price & condition w/ pics. Shipping to 33710 - thanks FABO Example pic provided.

Looking for a pair of the 1968-70 340 Exhaust Manifold Sleeve Nuts for pass side. Lmk what ya got, thx

Looking for 1967-68-69 steering column (PS or Manual) with a floor shifter - lmk what you have price & condition - Greg

Looking for a set of 1969 340 4bbl valve covers (must have the pass side 4bbl heat shield) and oil filler breather. Need w/o major rust or dings. I have a set of 1970 340 4bbl valve covers (still on engine) - would consider a trade LMK what you have - $$$ and condition, example pic provided. Greg

I have a 1998 Jeep Grand Cherokee 5.9 limited and the Dana 44HD (aluminum center section) is an open, so looking for a limited slip differential carrier. 30 spline for C-clip axles. Anyone parting out a 5.9 ZJ for the motor/trans and willing to sell the LSD carrier? LMK, Greg

Looking for a 33 tooth speedometer gear, yellow - Part# 2538933. Have numerous ratios to trade if possible or will buy out right.

I am looking for an older Auto gage 3-3/4 8000 rpm tachometer, PN 2302 or w/ shift light. Needs to be in excellent condition ***NOT interested in the newer PN 2309*** PM me what you have Price & condition - front face & shift light needs to be very nice

I am looking for a 68-72 V8 "biscuit style mount" K member (please no 67 k-members due to the different idler arm). Plan to chg the Moroso deep pan & current BB K-member w/ nice welded skid plate to lower the car for a handling suspension. Located in Metro Atlanta, so pick-up an hour or so...

Changing around my BB Dart GTS, no pro street - lowering w/ street suspension to handle the curves in Georgia. Would like to find a good low profile Milodon oil pan & pickup (PN 31580). http://www.summitracing.com/parts/mil-31580?seid=srese1&gclid=COyr2ZDE_LwCFcZZ7Aod3yIAJg Just dont want to...

Looking for a decent woodgrain shifter ball, does not need to be excellent as worn off woodgrain is OK - 3/8" x 24 fine threads s/b good and would like the jamb nut if available. Do not want to buy new but will recondition w/ my ralley steering wheel to match the pair. Shipping to 33708 Greg

Looking for a reasonably priced AT console body ONLY in excellent shape to dye black and install a reproduction console top on a finished car. Dont need the top plates No excessive wear on the sides, no holes or cracks - would prefer not previously dyed so the grain is still visible...

Looking for a very nice 69 Dart GT or GTS trunk finish (or tail) panel. Will pay good $$$ but not crazy money. Have a nice original black 68 GTS panel in storage available for possible trade only. LMK what you got. Send pics to [email protected] Greg

I need a 67-76 A-body MT aluminum mounting plate for a Hurst shifter. Brewers lists either a 195 6350 or a 195 0090. I realized that I had the wrong MT shifter mounting plate and now have an extra 1964-65 A-BODY aluminmu plate available. Will consider trades or will buy outright. Greg

Looking for a set of factory shifter rods for an A-body MT 833 in a 69 Dart, s/b same from 67-74. I have aftermarket & OD rods available for trade or will buy outright. Also looking for an Inland shifter HANDLE, planning to mate to a Hurst tower so I don't need the Inland tower. Thanks, Greg

WANTED for 68 Dart GTS: Full set of 68 Dart GT or GTS door panels in good condition for driver. Don’t really want to spend the money on repo panels. Color doesn’t matter as they will be dyed black. Prefer no major warping and no speaker holes but would consider depending on condition. Do...