Search results for query: *

Are the 70 Duster front drums or hubs the same as 72. I'm thinking they are and the change is in 73 correct?

Need brake upgrade on the Duster I bought. Slant 6 car .Since all the the BBp stuff that came with the car is junk, can I use the /6 LCA's. I heard they were the same regardless of year and engine size

Bought a 70 Duster last week . Guy had got the 73 up front disc brake hardware(used). Its a pin style caliper but the rotors I don't recognize I ran some #'s and came up with nothing. Could this be from a C body. Also look at brake pad picture. Anyone silicone Their brake pads?

Having problem with front brakes. 68 Dart ,73 front upgrade and 10" 4 1/2 on 5 in the back. MC is for 73 up and rotors are 11" pretty standard stuff . My problem is pulsing peddle when I brake and a knocking on the right side. Slow brake not so bad but hard brake it really lopes . nothing...

Not getting fluid to the rear brakes very inconsistent. I put my vac on rear right side and sucked until I got fluid then it stopped. Checked left side , no fluid. I disconnected lines at mid car put my vac on line from proportioning valve ... plenty of fluid , no air. I assume rear flex hose ...

After much problems with brakes. Not getting fluid to the rear. Last night I disconnected lines starting with back flex line all the way to the PV valve. No fluid coming from the rear port. I bought a new PV. My question, do to headers and heat and just not a lot of room. I have seen the PV...

Been looking for a proportioning valve for my Dart front disc / rear drum. A guy has this K H from a 73 RR will this work for me. I do have power boost.

where can you find the thicker OEM crush washers for banjo fitting

Noticed brake fluid under the car. I found that it was weeping from plastic sending unit piece. Its nut shaped 5/8" but wouldn't snug up. Are the fittings replaceable. Can I unscrew it and plug it or is it assign I need a new one.

Changed out my old line for new ones ,bled everything out , backs went great but the front caliper banjo bolts leak , pulled it apart reset everything still leaked. Bought new washers ..... still leak , flex hoses are fairly new could it be the bolt itself? maybe the washers I'm using...

I'm going to be changing out my stock 4x5 drums to 4.5 x5. Excluding the brake shoes is there anything i can use from the stock brake system. Like brake adjustment, spredder bar ,e brake. ? the new drums are from a 68 Cuda as close as i can tell by matching up wheel cylinders.