Search results for query: *

selling engine mounts ,good condition , 273, 318 $50. 90° oil filter with gasket small block $50. Both items plus shipping from Yakima Wa 98901

I have two sets of small block mounts . 318 mounts and 340 mounts . Top unmarked mounts are B/E 340/360 and marked mounts are 273/318 Do your home work before buying. Asking $125. For 340 and $75. For 318 . Plus shipping from Yakima Wa.

I have a 90 degree oil adapter for small block. Part is in good condition , comes with gasket. Asking $80. plus shipping from Yakima Wa.

For sale small block motor mounts . I believe first set is Bbody small block and second is Abody small block in good condition. Asking $125. per set + shipping. Located in Yakima Wa. 98901

Selling a 2 groove pulley and ider arm together or apart. Pully is 3- 1/2" deep and 7- 5/16 from edge to edge. Idler arm is for Big Block. $40. Each + shipping from Yakima Wa 98901

Selling a 90 degree oil adapter with gaskets $80. + from Yakima Wa. 98901

Selling a SB 727 out of a 1964 Polara. Comes with push buttons , park lever and all cables. Everything is functional. Transmission needs gone through. Location is in Yakima wash. $550 for all preferr not to ship

I a power steering pulley off a Federal pump /6 car. Pulley is 5 1/4" dia with a 11/16 center. Very hard to find. I bought it never used it. Asking $50. Shipped From Wa State

Still for sale. Reduced . Now $5,500. Firm..carb to oil pan. PM me for details. From yakima Wa.

Selling my 470 and transmission. Carb to oilpan Internally balanced. Bore 4.375. 10/1 compression Scat crank 4340SS Cam Hughes # HEH3237BL. 540/547 Pistons Ross #99538 Heads Edelbrock E Streets performer series Carb Holley 4150 850 CFM with large anulars . Intake. EdelbeockcDP4B Dist Pertronix...

I have a Holley 4160 600 CFM carb manual choke , vacuum secondary single inlet. I'm not a Holley guy . I showed it to Yellowrose who thought it looked pretty good. He rebuilds Hollies. What I do know is as per Yellowrose its a 2015 production carb. It came off a 79 GMC C6000. The carb functioned...

For sale is a set of SBP spring shock mounts in very good condition asking $50 plus shipping. Also have E Brake cables from same car. Should fit all abodies. Asking $35 plus. also fuel filler tube and vent tube. Good shape but inside has scale that should be cleaned out asking $45 + from Yakima Wa.

These are from a 1970 Duster front 9" SBP brake system . Struts are straight. Everything is clean and ready for paint. Spring shock mounts are the small mounts. $50. A piece per set (spindles , uca et )+ shipping. Shipps from Yakima Wa. Also have front drums.

I have access to a DP4B intake. It looks to be a very nice piece. I have the persons number if interested. Give me a PM . He's asking $200.

I have to sell my twin snorkel air cleaner. It doesn't fit (too large). Air cleaner is 17 7/8" wide pushes up against my wiper motor. This is for a 4 barrel carb. Its in very good condition. Comes with extra lid and air cleaner. Needs to be sander and repainted or powder coated. Asking $175 +...

For sale is a TM6 intake for low deck 383, 400 cid engines . This is an oldie but goodie and still preferred by a lot of racers for its top end. Manifold is in very good condition , all threads are good. (no heli coil). I'm asking $245 shipped to lower 48 from Yakima Wa. PM me with questions if...

From a 400 block , threads have had a tap run through them and are good. Free to who ever wants them just pay shipping.

I found my DP4B intake and will be selling my TM6 as soon as it arrives . I will be asking $250 plus shipping if anyone is Interested , also I'll have pictures.

I'M SWITCHING TO 3.23 FROM 3.73 . THE 3.73'S WILL BE AVAILABLE AS SOON AS THEY GET BACK FROM THE SHOP. LIKE NEW LESS THEN 100 MILES ON GEARS. BOUGHT THEM FROM RANDY'S . I THINK EITHER YUKON OR US 29 SPLINE. I WILL HAVE PICTURES AS SOON AS THEY GET BACK . ASKING $150. PLUS SHIPPING FROM YAIMA WA.

Have this left over. 1. P/S valve $45 2. 3/4 DDX 5/8 36 spline coupler $40. 3. Speedometer housing 727 $40. 4. P/S pump pulley for /6 shaft hole 11/16 pulley 5" W $45 5. 4 groove crank pulley from 400 cid $45. 6. Water pump pass side inlet $45. 7. Pie tin from 400 $25 8. Flex plate from 426W/...

Selling a BB pie tin good shape no dints 17 3/4 " wide from inside edge $25 + Also round flex plate from a 440 $30 + from Yakima WA

Have some stuff that needs to be gone. 1. Strut rods, straight with PST bushings fine thread 21 1/2" L $45. + 2. P/S power valve $45. + 3. 3/4 DD X 5/8 36 spline $45. + speedometer housing $40. + 4. P/S pump pulley 11/16 shaft X 5 1/2 wide for Federal pump came off of /6 Valiant $45. + 5. 4...

for sale is a blue 28 tooth speedometer gear and housing with retainer. I will sell as a whole unit only $50. shipped. lower 48 only. From Yakima Wa. PM me if interested

for sale is a new 60 amp alternator externally regulated . Has been checked twice for amperage everything checks out . Asking $60 + shipping from Yakima Wa. I have paypal

I'm selling a set of Big Block black powder coated valve covers. They are used but in good condition . I paid well over $100 for them I'm asking $65 shipped. Also I have for sale a new / slightly used 60 AMP alternator externally regulated . It has been check and produces 60 AMPs , asking $45 +...

I have an air breather lid in very good condition ,has been sand blasted and primed measures 17 3/4" measured from inside of lid from outer edges ,Asking $30 shipped. Also I have a pulley set ,crank four groove and water pump pulley shallow pulley. asking $45. shipped for the pulley's ...

For sale is a clean straight and ready to paint Big Block oil pan (187) with groove , asking $80 plus shipping or would like to trade for 4 barrel duel snorkel air breather. What do you have? Located in Yakima wa . PM me if interested in buying or trading.

For sale is a passenger side water pump housing . Housing has been sand blasted , very clean. asking $45 + shipping from Wa State

For sale 1000 CFM Race Demon. Concentrio venturis replaceable boosters replaceable air bleeds replaceable metering block bleeds streamline air entries billet metering blocks large capacity float bowls four corner idle adjustment most common tuning parts interchangeable from other...

Just bought a 470 stroker . Has a Demon 1000 cfm carb way too much for this engine , so I'am selling as is . As far as I know works good , at the most a rebuild kit . Asking $670 shipped , these are a $900 carb new. Located in Yakima Wa. I have Pay pal more pictures if you like.