Search results for query: *

I believe this fits stage IV heads #8 intake port is misaligned lol somebody at the foundry wasn’t paying attention! Don’t know what it’s worth. The part#is in one of the pics. 300.00 OBO

I have this unfinished intake I would like to sell, I guess you can make it fit 59* or 48* or a small block Chevy for that matter lol obviously the intake bolts have to be machined. And intake ports are like 273-318 size. I’m asking 250.00 shipped.

Came off a good running 340. Has 2.02 / 1.60 valves in it already, clean no cracks springs are for a hydrolic flat tappet ( had the 509/292 cam in it. 300.00 I’d rather not ship these

PN#4120249 complete set plus 2 extra. Single spring with dampner for hydrolic flat tappet up to 510 lift. 125.00 plus shipping

PN# 1111 double valve springs never used. 150.00 plus shipping.

I have a holley W2 strip dominator intake. Never been ported all the intake holes are perfect and to my knowledge has never been milled 300.00 and I’ll include shipping.

Came off a 69 Cuda with a 318. 100.00 includes shipping

Pn# 5215 I got these with an engine we bought, one pipe on the drivers side was bashed in and I just replaced that section with a new 2” elbow from heddman. Painted with rust encapsulator ready for hi temp paint. 350.00 no shipping so either pick up or delivery in the N.Y. N.J Conn area.

R3 short deck Siamese block. New. Bore is 4.15. Ford 302 mains - 60mm cam tunnel - Jesel keyway .937 bushings installed. Sonny Bryant / Arrington crank 3.30 stroke. 360 cid. Carrillo rods. W8 cnc 15* bare heads. Magnesium valve covers - mopar 598 intake. There are no pistons or Valvetrain. I...

This is an old CSI ( before they became CSR) electric pump works good put new O rings on the pump side, needs gaskets for the plate side. 100.00 plus shipping

These are part# 5215 for a big block in an Abody fenderwell headers. They have some dings from previous owner I’m guessing from clearance issues otherwise there in good shape. I sanded some surface rust off them and painted them with VHT high temp paint. Asking $300 plus shipping. Painted from...

this was on a 451 stroker engine that my friend bought, the guy said he bought it brand new and went to the track put some passes on it and some street time and decided to sell the engine. I’m building a new motor for him and we’re not running E85 so it’s up for sale. 600.00 these are 900 brand new.

Engine is not complete. Needs machine work, heads are bare cnc circle track heads. Have 598 intake 60mm UGL cam, Bryant crank 3.30 stroke, carillo rods. No pistons no Valvetrain. .937 Jesel lifters bushing installed in block. 7500.00 firm

I have a short deck R3 block with nascar W8 cnc heads with extra parts that I have decided to sell. The block has Jesel keyway bushings installed. Billet steel 4 bolt mains 60 mm cam tunnel, 4.15 bore, I have a sonny Bryant 3.30 stroke crank to make it a 360 cid. I have a 60mm UGL cam. Carrillo...

Came off a 70 340 duster. Pulley is a little bent. 85.00 shipped anywhere in the U.S.

Very nice air cleaner with a new sticker on the lid. 200.00 plus shipping. Mark.

Excellent condition. Has the air door that works. 240.00 plus 20.00 shipping anywhere.

they came out of my 98 dodge ram 1500. im the original owner both have 166,000 miles. engine runs with great oil pressure but #4 cyl has a bad exhaust valve and the trans needs a rebuild. comes with all accessories. seeing if any interest, looking for 500.00. im on long island so anybody on east...

came out of a 69 cuda w/318. includes pitman arm. 100.00 PLUS SHIPPING.

used good condition. been sitting around a long time. 100.00 for both plus shipping. mark

off a 69 cuda also. 40.00 plus shipping. thanks mark

came off a 69 cuda. they were in working condition when I removed them. 50.00 for the pair. thanks mark

these are a barely used set of wires from mopar performance. wires are numbered and have the factory split loom. 40.00 includes shipping. thanks mark.

these are stock pushrods for 318-340-360. all straight I have 2 sets of 16 plus some spares. 50.00 includes shipping

3 groove pulley is 3.75" deep and the 2 groove is 3.25" deep. 2 groove came off a 340 w/PS and the 3 groove cant remember. 35.00 each including shipping. thanks mark

the truck wires are 7.5mm mopar performance and are barely used. just been on the shelf for a few years. the are numbered and have factory split loom on them. 25.00. the orange wires are mopar resto wires 7mm. they are new in box. from jegs 35.00. thanks mark

came off a 69 cuda. 45.00 shipped. mark

I have had this intake probably for 30 years. I was finally going to use it on my 72 340 but I have a nice LD340 instead. this is for a thermoquad. it still has the solenoid on it. 150.00 plus shipping. this thing is 45lbs. mark

1st one came off a 69 318 and has the 2" factory spacer and I also have the pulley and the long bolts for it. 70.00 including shipping. 2nd one is from mopar pperformance and came with the viscous fan drive kit. this is new, 45.00 with shipping. thanks mark

1st set of springs came on my W2 econo long valve heads. they are brand new never run. double spring w/dampner. I think they were intended for a roller cam. 100.00 2nd set is hughes PN# 1111. these are brand new double spring and are recommended for a wide range of there solid cams. 100.00 3rd...