Search results for query: *

I'm freshening up a 1974 low comp 318 with a quick hone, new plasma moly rings and new bearings. I done some home bowl porting & port matched the 675 heads with larger 1.88 / 1.60 valves. SCR will be around 8.5:1 with Mr Gasket 1121G (0.028") head gaskets. Using a port matched Performer intake...

Has anyone built a 273 Commando or other mild 273 mill, with either a hydraulic or solid roller stick? Is there any real benefit to a roller stick in such a small V8? Hypothetical A Body 273 build to base this discussion on: 273 block bored 0.030" with a zero-deck flat-top piston (9.5:1 SCR)...

I'm sure this may have been covered before, however l'd like to hear from people with direct experience. I'm building a 340/416 with mildly ported iron J heads, 9.5:1 static comp, Weiand Stealth intake, Carter Comp Series 750 carb, Doug's 1-5/8 long tube headers. The car's a 67 Barracuda with 4...

Hi folks, can anyone provide some specs regarding the last of the LA 360's manufactured between 1989-92. Looking to buy what appears to be a good running '89-92 360 motor, want to use a Weiand 8022, an AVS2 650, 1-5/8" long tube headers and replace the OEM hyd roller with something else. Any...

Looking to get a set of Doug's D453B headers for by 67 Barracuda. Anyone have any experience with these headers, and in particular the ones with hi-temp black coating. I have two questions: 1. Does the hi temp black coated headers reduce heat in the engine boy (like ceramic coating headers). 2...

Has anyone ever tried to port/gasket match a pair of OEM 273/318 A body exhaust manifolds? Any noticeable difference in power? I have a 67 barracuda with a 273 Commando mill, was wondering if I should gasket match the original exhaust manifolds or install the Flowtech full length headers I...

Does anyone have any images of a '67 273 Commando mill from back in the day? Publicity shots, or actual shots of the engines when they were new. I'd like to get an accurate account of the engines & engine bay. Thanks.

Has anyone actually built & run a 318 just like a 273 HiPo motor? That is, a 318 short motor with a nice flat-top piston that will produce around 10:1 static compression with 273/318 '920' closed chamber head, and the following 273 Commando parts: * Cast iron single plane 4BBL intake manifold *...

Hi all, I have a 67 Barracuda Formula S with a 273 Commando and 4-speed. For whatever reason the previous owner replaced the original cam with a hydraulic stick and stamped non adjustable rockers. I have no idea what hyd stick is in the engine now, the 273 has a really loppy idle so it would...

Hey fellas, It all a bit too confusing. Can anyone tell me the part number of a Fel-Pro full gasket set for a SBM with Fel-Pro 1008 head gaskets? Looking to screw my 340/416 together with Eddie heads. Thanks. Chris.