Search results for query: *

Looking for opinions/recommendation on which intake to pick up. Engine info: mild 5.9 magnum with stock pistons, .218/.224 cam, speedmaster aluminum heads (not sure yet if I’m gonna get them ported or not, need to get some quotes). Plan would be to add injector bungs to whatever intake I run...

I finally got my regrind cam ordered and received from Oregon cams and I’m looking for advice on which valve springs to run with it. It’s going in a 5.9 Magnum, with speedmaster aluminum heads. Here’s the cam card. Would the Hughes 1199 kit be the kit to get? I tried calling Hughes but...

Hey everyone, so these rocker arms popped up for sale on a Mopar fb page and I thought I’d take a gamble on them. As can be seen in the pictures, the rocker arm with the X on it, is cracked. Anyone know what brand these are or know what brand I should get a replacement rocker from? I got them...

Quick question. Last week I put a throttle bracket on my 5.9 magnum. Took the 2 intake bolts out, put the bracket on and torque the bolts back down. Problem is I torqued to factory la specs which is 30 instead of the magnum specs of 12 ft lb. The one bolt I didn't torque all the way and the...

Last fall I bought a 97 (I think) ram, that had an engine fire, for parts and I was wondering if the engine is worth using as a builder or if it's be best to clean up the block and build a coffee table with it? Everything in the engine compartment and interior of the truck was torched. It got...

Are the oil pickups between 318s and 360s the same or not? I replacing a 318 with a 5.9 magnum and I know I need a center sump 360 oil pan and center sump pickup but didn't know if my pickup from the 318 will work or if the 360 pickups are different?

Ok. As some of know the eccentric in my 318 is loose requiring me to pull the front of the engine off to tighten or replace it. Well, yesterday I took off the water pump and pictured below is what I found... A little history on the car... This car was drag raced back in the 80s/90s but was...

Just thought I'd see what machining prices are in different areas and what good prices are for all the different machining, boring, milling, porting are and also prices to assemble a short block. I called the local shop today just out of curiosity and he said to bore a v8 to any size is $115 and...