Search results for query: *

Question for you all, that I seem to find conflicting answers on. Will a thrust block in an open 741 interfere with my Yukon axles with green bearings? I have a 3.92 SG in there now, thrust button removed, but in the next few weeks i'll need to tackle a 600 mile road trip and was thinking...

What is the general feeling around re-using gears. Can a set of gears that have been broken in on 1 carrier be used on another?

..can I shim my pinion down? In other words I need to go down about 6* with the pinion, will a 6* shim fit? Also, theres a bunch offered on summit are they all the same as long as you have the width correct?

Hi all, I have a 489 8 3/4 in my duster, it came to me with Yukon axles installed in it. I have a drone like noise when I drive above 40 mph, it gets considerbly worse when I go around a left hand corner and appears to only come from the back right wheel and pretty much goes away when going...

I'm trying to track down a vibration in my new-to-me '72 duster with a 727 and 8.75. I took a look at the drive shaft and u-joints last night and one thing that stuck out to me was the rear joint didnt appear to be centered in the rear yoke, the caps were tight in the straps, and the joint has...

Hey all, I searched this forum a bunch and couldnt find anything. I just bought a 72 duster with a crate 360 and a TCI street fight transmission, with a TCI 3500 converter in it. right now the tranny is cooled just through the radiator and I have a B&M temperature sensor on the return line...