Search results for query: *

I am getting ready to do the MAD upgrade. My dart has an MSD 6A ignition unit installed and everything was working fine until: 1. My Dart wouldn't start and the Key would not engage the Starter. 2 I left the key in Run and jumped the Starter Relay but the car would not start. 3. The Fusible...

My Alt gauge is fluttering back & forth at mild cruise speed. I flutters between 1/4 and 3/4 full charge approximately. It is a 73 Dart Stock Charging system. I did do a search but didn't find anything for "Fluttering". Just hoping for a quick point in the right direction. My ground tests good...

Please post a picture or three of the Ground Strap/wire for a 73 Dart 318 auto. The one to the Firewall from the rear of Engine. Mine was left off by the P.O. and I'd like to add one back. Thanks!

When I installed My Olde Tyme White Gauges, the Destructions said to Ground them close to the senders. I always thought that Good ground was good ground. So I called Autometer Technical Support. They told me that the gauges would read lower the farther away the Ground was from the sending unit...

Does any one know the correct Amp amount for '73 Dart with F11 Alternator code? Pre '70 come up as 46 Amp and '70 + '71 comes up as 70 Amp. I can't seem to find anything for the later Mopars. I also read that the wiring was "beefed" up in the later years for the Higher Amp Systems. Any info on...

While cruising with lights off and no significant load on my charging system, My alt. gauge is reading about 35 amps or so(Near Full). Is this normal? I am used to the gauge coming back down to the middle position once the battery charges back up after a start-up. I know it's highly recommended...

.......for interior? I'm finally hooking up my Autometer Oil Pressure and Temperature gauges. Should I just come right off the Fuse Block? I could also use unswitched and install a mini toggle switch with an inline fuse. Thanks, Gerry

On My '74 Dart,I've been working for a couple of hours and Got A bunch more lights working now. I am just a bit confused on the Chrome Fender Mounted indicators. Being there's only One wire to it, is the Screw the ground?? The right side works but left does not. I can make it work by "forcing"...

Cheers: I'm back from the road but need some help. I want to buy an electric Auto Meter Speedometer. Any input would help as far as the Sensor part of it. If anyone has installed one of these please let me know how you handled the install. Thanks, Gerry P.S. I drive Truck Over the...