Search results for query: *

Have almost new QFT 600 Slayer carb for sale. Vacuum secondary and electric choke. Looked to pick up a little at the track vs Eddy 600. No difference but the QFT has better response on the street. Swapped out the QFT for a Eddy 650, annular boosters. Guess what. Drag times exactly the same...

Quick Fuel Slayer Series Carburetors SL-1957E Bought this carb brand new 7/22. Runs great. Vacuum secondary and electric choke. Switched to annular booster carb. I bet it doesn't have 300 miles on it. Sprayed with WD40 for protection. $350. Shipped to lower 48. Paypal F&F.

Put a Pertronix ignition box on my race car, put the MSD from there in my Valiant (for two step function) so the HEI set up is for sale. Complete set up professionally done including the coil and a Procomp soft touch rev control. Everything is marked so its plug and play. $125

Removed this Edelbrock 1405 from my 67. Runs great. No hesitation, no stumble. Also has the Thompson Powerblast Plate. Choke is there but It’s unhooked. Never needed it Swapped this carb out for a QFT vacuum carb why? Because I can’t leave well enough alone. On the drag strip both carbs are...

AED carb I bought brand new and it’s only been run on my drag car. 440 540 cam, 3000lb and ran between7.10-25. Bolted it on like it came and it ran beautiful. Adjustable air bleeds. This is way above a run of the mill Holley. Swapped it out last year for an 850 and it was a pretty much a waste...

Have my M1 for sale. Spread bore with 4150 aluminum adaptor. It ran it on my drag car since I bought the car. Ran it with iron and aluminum heads. Apparently it was run with multi injection at one time as the ports are welded up which is great if one wants to do the same. One broken stud on the...

Have the hyd Comp Cam .507/.510 for BB I removed from my race car in lieu of a solid cam along with lifters and springs. Bolt it in, use stock pushrods & your stamped rocker and your good to go. All lifters are marked to each lobe $150/offers, plus shipping from Buffalo, NY

8 3/4 carrier out of a 489 case along with a Richmond Powrtrax Lock Right up for grabs. Easy install. Simply check your backlash, remove the carrier, swap over your ring gear and install with your backlash, add 85-140 and go. $325 plus shipping from Buffalo, NY

I traded a guy 4 speed parts for a full race 904 with low gear set in it so Im selling my 999. Just pulled it out. It has a Turbo Action manual valve body. The vb is brand new. It has maybe 40 miles on it. The thing shifts like a monster. It will squeak the tires 1-2 and 2-3 on the drag strip...

I have a999 trans for sale. This is a heavy duty 904. Its behind a externally balanced 360. It has a Turbo Action reverse manual valve body in it so the lock up feature is disabled. Its complete with stock torque converter(with weights) and flexplate. Its still in the car if someone close to...

Cleaning up the garage. Centerforce diaphram pressure plate for sale. CTF 361739. 101/2” I had it behind a 360. Never was happy with the release so I pulled it out and went back to the B&B. It has 2-300 miles at the most. Pressure plate only. $150 includes shipping to lower 48.

833 aluminum OD with passon slick shift kit and matching bellhousing. Pulled out of my car for automatic swap. New bearings and input shaft when slickshift kit was installed. Yeah I know but 40 years in trucking and many clutch cars I surrender $549 Located in Buffalo, NY $549

V8 manifolds. Early A 64-66 273. Had them on my 67 360 so they also work on 67 and up. Also have the flanges that bolt to the manifold. $50/offers plus the ride. Pm if interested

Hurst Pistol grip shifter repop. Very little use. Its a B body shifter which can be used in A body with buckets. Also has a button for a line lock installed in it. Perfect shape. $200 includes shipping to lower 48. Paypal.

I have small block scattershield and block plate fresh off my car. No stripped holes. A small portion of the right flange was sliced off to clear TTI headers After 40 years of driving trucks and standard shifts, father time said no more. $275 plus the ride from Buffalo, NY And portion...

i have a MSD #8732 two step box for sale. It works the the 6al digital box only. Use 2x and went to 6al-2 $75 or offers. Ships free to lower 48

I have complete FiTech EFI 4-600hp carb along with inline fuel pump system for sale. Also included is corvette bypass filter so you dont need to run a return line all the way back from the engine. A whole bunch of extra fittings included. All wiring, plugs etc are complete. Nothing is chopped...

Set of early A V8 manifolds. They also work on 67 up. Straight edge across the flanges looks good. Took them off my car as Tti’s are on the way. $50 plus the ride from Buffalo, NY

I have this on ebay. Its going to sell. Price is low if you need a budget manifold. TM5 Edelbrock Manifold SB Mopar | eBay

I have a Centerforce pressure plate #CFT 361739 for sale. I had it in my car for 2-300 miles at the most. $225. Free Shipping to lower 48 PAYPAL for payment

I have MSD two step. It ONLY WORKS WITH 6425/ Digital 6AL box. Used it two times and switched to 6AL-2. $75 or offers. ships free to lower 48. PayPal for payment

I have a MAD Digital 6AL 6425 for sale. All the wiring and mounting accessories are included. The main wires from the box to the coil and distributor were never cut This unit is out of my race car so it basically has seen very little use. I upgraded to a 6AL-2 $120 includes shipping to the...

I have a brand new set of 5.13 gears. Still in the original box. They are for a 742 case $100 plus the ride

I have a TM5 Edelbrock for a 360 if anyone is interested. It came on the car when i bought it. Just replaced it with a Eddy Performer. The runners are clean. What you see in the pic is gasket material still on it.This manifold work best on a high reving motor..... $100 plus the ride or Ill take...