Search results for query: *

First time removing LCA's and having a bit of trouble. I followed everything in the service manual and have double checked everything. I have nothing holding the LCA's on the K Member other then the pin from the k member that goes into the control arm bushing. I have put a pry bar to the control...

Ripping my car apart for a full restoration. I will be doing the majority of the work myself along with help from some very experienced and skilled people. I have a 16:1 manual box that is stock from factory with a ton of miles on it so I probably should have it rebuilt. Is it a difficult...

Can someone tell me what would have come with a 68 HD Suspension option? I know a sway bar, I am assuming hd springs, and would it have heavier torsion bars? The car is a non formula s barracuda.

Can they be replaced without fooling with the lower control arm or is it more effort than its worth and I should just wait until I rebuild the front and do it then? The bushings are in bad shape but I plan on rebuilding the front end when I do disc brakes this winter.

Swapping from the federal pump in my 65 dart with a 273 to a saginaw pump so I can adjust the pressure. Anyone know what brackets will work on my motor? I went to the yard yesterday and the only sag brackets I found were on a few 80 Rams but the brackets bolted in to holes on the block/head that...

Is there a difference in diameter of torsion bars from a 65 Dart w/ a 273 and a 69 cuda that was a factory 318?

A friend of mine has the fast ratio pitman and idler arms that he is willing to let me have since they won't fit with his Tti. But the car he had them on previously he swapped out the steering box for the larger spline off of a police package vehicle. When he sold the car he took off the arms...

Hey guys this is my first early a and I was wondering how the power steering compares to a later a? I had to modify my 69 ps pump so it was much less sensitive. I definitely want to keep it with ps but don't know much about the early a ps pumps. Thanks guys

Is this bolt up or would there be some fab required? What is the axel length difference? I've been searching for a while but cant find too much axle info for early a's. Thanks

I'm looking to put an 8 1/4 rear end in a 68 Valiant. I used to have a book that told me a cross reference and what could bolt right in to different cars. Unfortunately I am unable to find it now. Would a Volare or Aspen rear end bolt up or would the axels need cut? Does anyone have a website...