Search results for query: *

  1. younggun2.0

    My custom console is almost done

    I built myself a console for my kilduff lightning rod shifter. Did it all with a drill press and wood router. Here it is after cerakote. I machined all edges and started final assembly.
  2. younggun2.0

    Check out what I got!

    I finally pulled the trigger and bought a bill Mitchell aluminum block! 4.5” bore, cross bolted mains, billet steel caps.
  3. younggun2.0

    NEED YOUR HELP

    Hey guy, been a long time. I’ve been crazy busy with life. I recently purchased my dads 71 demon. It’s a 451 big block street/strip car. Runs mid 10’s driving to the track. I had a front tire blow out and it destroyed the driver side front fender. I’m having a tough time finding one. Any leads...
  4. younggun2.0

    Need your help!!!!!!

    Hey guys. Long time no see. I’m rebuilding my entire car. Local shop destroyed my intake. I’m looking for a weiand high ram tunnel ram for a low deck b engine. If anyone know where to find one I’d greatly appreciate it!
  5. younggun2.0

    This is what happens when I get bored...

    I’m waiting on parts and powdercoat. Was organizing my parts and started to rebuild my proportioning valve. Well on thing led to another...
  6. younggun2.0

    Carbon fiber steering column build.

    I’m rebuilding the car and doing what I can to customize it and make it faster. I built this column. Here is the bottom mount. then I made the upper mount. I used 1.5” OD x 1.25” ID. I had to home out the ends for the bearing. I started the hole with my step bit. Once I had the...
  7. younggun2.0

    67 and 68 dart tail lights and grill interchange!

    I have my 67 dart. It’s nowhere near stock. I like the 68 grill and tail lights. Are they a direct bolt in for 67?
  8. younggun2.0

    My custom dashboard

    Getting my dash assembly together and I’m very happy with it so far!
  9. younggun2.0

    Aluminum alternator brackets

    I decided to make my own alternator brackets.
  10. younggun2.0

    Car is painted, cut/buffed and back home!

    Brought my dart home on my birthday! Best present I ever received!
  11. younggun2.0

    Dash pad and dash are done!

    Built carbon fiber dash pad and shaved ashtray on dash frame. Got it all painted and cleared.
  12. younggun2.0

    New paint job is done!

    Got the body panels fit, car is cut/buffed. Just waiting on dry day to bring it home!
  13. younggun2.0

    Finally getting paint on the car!

    Hard to see in cell phone pics but this is 2017 dodge sublime green pearl. it really pops and in the sun should be amazing.
  14. younggun2.0

    Carbon fiber dash pad.

    I’ve always wondered why nobody has taken alternative routes to dash pads. Most are cracked, nice ones are brittle and crazy expensive. So mine was cracked, my car is super custom so I said screw it, a carbon fiber one would be cool. I stripped the foam. This gave me my base. I coated the...
  15. younggun2.0

    Engine bay mods done and in epoxy primer.

    Well after hundred plus hours of metal work I got my engine bay in epoxy primer tonight.
  16. younggun2.0

    US CARTOOL CORE SUPPORT INSTALL.

    Hey guys. My car is apart for body and paint. My front core support was pretty trashed and the US CARTOOL. Piece looked perfect. 14ga construction, flat and clean looking. It also moves radiator forward 3/4” forward which is big for us big block guys. So I dropped the $500. Here it is out of...
  17. younggun2.0

    US cartool core support install.

    My front core support was Swiss cheese on my dart and I stumbled upon the US cartool replacement core. It’s made of 14ga steel and it’s flat. This will move the radiator forward over 3/4” which is a plus for us big block guys. Here is the support. I am going to be honest with you guys...
  18. younggun2.0

    Another short GoPro video

  19. younggun2.0

    Johnny got a GoPro

  20. younggun2.0

    New pedal for the dart

    I wanted to update the look of my stock pedals and the billet specialties ones are about as close as I could get to match my current interior design. Here’s what I got. Got universal throttle pedal, camero brake pedal and emergency brake pad for my dimmer. I had to fab a mount for my...
  21. younggun2.0

    Cerakoted my steering wheel

    I had A billet specialties steering wheel and always hated the look of the aluminum finger notches on back side. Looking from outside in it looked super tackie. Like it belonged in a goofy *** low rider. So I decided to get it cerakoted. Turned out bitchin’
  22. younggun2.0

    New least favorite project

    painted first coat on rollbar today. Total pain in the ***
  23. younggun2.0

    Built a new package tray

    I put a rollbar in my dart and the rear bars go thru package tray. So I figured it was time to build a jazzy one.
  24. younggun2.0

    Fabricating a shifter console

    Started with paper template then made MDF frame to shape my steel
  25. younggun2.0

    My new headlight setup

    Last time I had my car out the races ran late and I had to drive home in the dark! Even with my high beams on the stock setup was scary. I know some will say that halogens are bad but they are much brighter. I also got the conversion lights with the LED halo rings. The halo light is setup on a...
  26. younggun2.0

    Got ahold of a street bike tonight! Ruined his day!

    Was beautiful day in western Washington today. Mid 60's sunny. Was working in a buddy's shop today. Decided to drive the dart over. Worked 10hrs. We grilled some burgers had a beer and I headed home. Cruising along at 55ish. See a bike coming up my left side. He's moving, 100 plus. As he passes...
  27. younggun2.0

    My new valve cover breather tank install.

    Getting ready for new engine and I needed to get a breather assembly together that would have ample ventilation and eliminate leaks of open breathers. http://s1152.photobucket.com/user/johnnydart431/media/51156503135__06669260-1A81-4E46-AE06-DC2D39CA6A76_zpsc9xhy9s5.jpg.html][/URL]...
  28. younggun2.0

    Built my tunnel ram throttle linkage tonight

    Well I'm getting close to throwing everything together and I tackled the throttle linkage tonight.
Back
Top