Search results for query: *

I'm running the magnum 380 crate cam with hughes heads and 1.7 harland sharp rockers. What's a good converter with that combo? Also have a 904 trans. And 4:10 gears

My 70 dart went 12.8@105 with unknown cam, stock block and heads, 670 street avenger, TRI step headers, 904 trans with stock slant six converter and 3:55 with locker and slicks. I have a 750 double pumper, 3000 stall converter, and I'm getting EQ heads. What would be a good cam choice. Thanks

I want to upgrade the cam, valve springs, and maybe rockers in my 360 magnum. I bought the longblock used and the previous owner said he put a cam in it but couldn't remember what. The cars been great, got it to do 12.8 @ 105 mph in the quarter mile. The motor does have stock valve springs which...

I have the Kevko oil pan on my 360 magnum Part#M302. my problem is the dipstick doesn't seem to slide into the pan right. i really dont want to drop the pan as its in the vehicle. anything i can do to correct it. i still have the truck dipstick tube. Thanks Tom

Does anyone know where you can get stock replacement valve spring retainers? or a retainer that will fit the conical magnum valve springs? thanks

engine has been sitting a while. is it hard to check cranks and rod bearings without taking the heads off? the engine is on a stand right now. i bought it assembled but dont know cam specs or anything. i was going to replace the oil pump for cheap insurance. it came with edelbrock rpm intake...

my 360 magnum has been sitting a while and there is alot of play in the rocker arms. is this because of lifter bleed down? will i need new lifters? tom

im buying a magnum 360 with the intention to just drop it in the dart. guy doesnt know too much but it has a rpm intake, mechanical fuel pump with la style timing cover, kevko oil pan. and said the guy he got it from put a different cam and timing set in it. he said its been sitting with a...

what parts do you actually need to run a mechanical pump on a magnum 360 with a 4 barrel carb. I am trying to get all my parts together before i buy a magnum engine. im trying to do this on a tight budget, like thats never been said before lol. i do have a front timing cover off a pre-magnum...

does the clutch fan set up out of these trucks work with the stock shroud or do i need and electric fan? has anyone used it and do you have pictures?

Its probably been beatin to death but can you run a serpentine setup with no a/c and no power steering. also can you use the stock dodge ram alternator and how would it wire up? tom