Search results for query: *

  1. gkmopar

    [WANTED] Weld nuts

    Need 2 weld nuts for 72 Demon to mount Radiator. I know they take 1/4" bolts but the smallest I could find is 5/16".
  3. gkmopar

    [WANTED] 13" base for unsilenced air cleaner

    Looking for an original base only for a late 60's unsilenced air cleaner.
  4. gkmopar

    [Found!] MC boot & retainer

    Looking for a boot and retainer for the master cylinder push rod on a 68 Dart with manual drum brakes.
  5. gkmopar

    [Found!] Passenger door seal

    Looking for a decent used passenger door seal for my 68 Dart. I have a good driver door seal so I don 't want to buy a new set if I don't have to. Anyone got one laying around?
  6. gkmopar

    Seat belt mounts

    If anyone is cutting up an A body I need the round cupped discs with a nut welded on them for the outer rear seat belts. They are attached to the underside of the floor pan that goes over the rear axle.
  8. gkmopar

    [WANTED] 68 Dart interior trim

    Looking for a chrome piece for the passenger door on a 68 Dart. It is the piece that attaches to the lower part of the upper door frame that the upper part of the door panel attaches to. Gerry
  9. gkmopar

    [WANTED] Redline tires

    Looking for 4 215/70R14 or close size redline tires. Used ok Gerry
  10. gkmopar

    [WANTED] Seat belt nuts

    Someone removed the two rear seat bllt nuts from the floor on my Dart. Does anyone have two of these? Gerry
  11. gkmopar

    [WANTED] 68 Dart driveshaft

    Looking for a 51.53" center to center u joint 3" Diameter driveshaft. Gerry
  12. gkmopar

    [SOLD] M-Cyl pushrod

    I'm looking for a manual brake pushrod that goes between the pedal and the master cly on a 68 dart.
  14. gkmopar

    [WANTED] 1968 Dart Parts

    1968 Dart Convertible parts needed (update) -Clips to hold the boot trim to the body -Passenger door top trim that goes on the outside of the window -Two box shaped brackets that are welded to the rear seat area floor that the lower part of the upper rear seat bolt to -Rear crossmember...
  15. gkmopar

    [WANTED] 1968 Dart parts

    1968 Dart parts needed License plate light assembly Plastic/rubber rear bumper to body cushion on the driver side Two chrome pieces of convertible boot trim that jog to connect the front to rear chrome pieces between the top and quarter window Clips to hold the boot trim to the body Passenger...
  16. gkmopar

    [WANTED] 68 dart parts

    Looking for a few things for a 68 dart: -Rubber piece that goes between the rear bumper top and body for the driver side -rear license light assembly -Piece of firewall metal around blower motor to center of firewall non a/c. Someone hacked it up to install a larger motor and I want...
  17. gkmopar

    [WANTED] Dart gts emblems

    Looking for a pair of 68 Dart GTS interior door panel emblems
  18. gkmopar

    [WANTED] Duster/Demon headliner bows

    Looking for a set of headliner bows for a mid 71 Duster/Demon. It is the 4 bow set. Also need the two rear wires that attach the last bow to the rear window area. Already got burned on a set that scammer 68Roadrunner never sent so I am in the hole to start.
  20. gkmopar

    [WANTED] P/S bracket

    Looking for a rear P/S bracket for a 69 440 with a Saginaw pump. Attached is a picture. Thanks, Gerry
  21. gkmopar

    [WANTED] Duster door glass

    Looking for passenger clear door glass for a 1970 Duster. Also need the two "Dog bone shaped" pieces that hold it to the regulator. Gerry
  22. gkmopar

    [SOLD] 72 Duster parts

    Looking for: 1)Wire with retainers that goes from one side on the bench seat track to the other for a 72 A Body 2) the piece of wire and plastic retainer for the clutch safety switch lever on a 72 A Body clutch pedal Thanks, Gerry
  23. gkmopar

    [WANTED] Duster floorpan

    Does anyone know where I can find a used floorpan for a Duster? I can get an AMD for $405 but I would prefer a decent used one.
  24. gkmopar

    [WANTED] Water valve

    Does anyone have a 3579173 water (heater control valve)? Would take new or used that does not leak.
  26. gkmopar

    [WANTED] Duster bumper spacer

    Does anyone have one of these laying around? It goes between the top corner of the rear bumper on a 1972 Duster/Demon. Gerry
  27. gkmopar

    [WANTED] Demon hood

    Looking for a 72 Demon hood with mounting holes and 2 large air intaks holes set up for the snorkle scoop. Don't need scoop as I already have a couple. Gerry
  28. gkmopar

    z bar plate

    Looking for the plate that is attached to the driver frame/inner fender on a 72 Dart.
  29. gkmopar

    1972 Dart bench seat

    Looking for a split back bench seat for a 1972 Dart 2 dr or Demon. material not important but must have the 7" headreats. I have attached a picture. PM me. Thanks, Gerry
  30. gkmopar

    1972 Demon bench seat and door panels

    Looking for a bench seat for a 1972 Demon. It is a B1 code which is a black/white cloth/vinyl with a 7" headrest. Material type and condition not important. I have attached a picture of the seat type (green one in the picture). Also looking for matching black door panels and rears to match. Let...
  32. gkmopar

    Demon bench seat

    Looking for a B1 code 1972 Demon front bench seat. Can recover so material type and condition not important.It has the low built in headrest. I have attached a link to a picture. http://www.hamtramck-historical.com/images/dealerships/colorAndTrim/1972/72_Dart0006.jpg
Back
Top