Search results for query: *

I'm curious what rear main seals are you guys using on your la 360 ? Will the magnum main seal work ? Is there a difference. Thanks Jim

I'm curious , when adding studs on main caps do I need to have align bored ? Or can I just add studs ?

I was curious who out there is running a retrofit hydraulic cam in there s.b. mopar ? I have a 410 stroker finally going together after years on the shelf. I have a lunati solid flat tappet . I'm thinking of possibly switching to hydraulic roller ? What cam are you running ? How do you like it ?

What do I need to know ? Who has done this ? It makes me nervous grinding on block ! I'll be honest , I'm scared to destroy my block ! Can the experienced on this give me a crash coarse ? Stuff has been sitting far too long ! I need to get this done !! What do I need to know ?

I have a mopar cam and lifter set new from 97 I think thats how long I've had it ? So I want to get a bigger comp hydraulic cam and use the mopar lifters. I don't see how it would be a problem ?

I have some u heads 2.02 1.6 Im planning on trying to home port mildly. I need some advice and pics from the more experienced guys on here. I have never attemted to port heads before. I have a die grinder . What do I need ? What all do I clean up on the heads ?

Today I picked up a core 1990 roller cam non magum block for free !! First I noticed there is no provision for a mechanical fuel pump. Other then the obvious , that its a roller cam la block , are there any other advantages ? Are regular roller lifters better then retrofit lifters ?

I'm curious what a set of imported w2 heads new with valves no springs or rockers and a holley strip dominator that's ported with baffles are worth ? I picked them up from a old time racer in trade . Thanks Jim

Got the 340 in my Cuda together last night . When we tried to fire it all it did was crank and spit a little ? Firsrt I had a pert tonic coil on the coil was hot to the touch . Tried the stock coil I had on the car prior . Checked timing 3 times ? It is right on and has 32...

I see db electrical high torque mini starters on eBay for 72.50 brand new . When I took my Mancini high torque mini starter and compared from pics they look the same , only the Mancini one is twice the price . Has anyone used one of these db mini starters ? Thanks Jim

Has anyone run these? I bought a set off eBay I think the price way good I have heard they are durra or and work well ? I see they don't seem to make them anymore ?

Im sure this has been posted before. I am currently putting together two small blocks 1. 73 360 .030 kb 107 ported J heads by IQ52 mopar 292/ 509 cam eagle rods Ballanced stock cast crank 10/10 air gap port matched intake holley 750 dp mp electronic recurved summit ignition box tti headers...

I saw some retrofit roller lifters on ebay for 219.00 Seems really cheap ? Does anyone know about theese ? At that price it makes me wanna get a roller cam !!!

Does or has anyone run stock rocker arms on small block Edelbrock heads ? The plans are to switch to roller rockers later on. I just had the heads sent off to get ported in Idaho by a guy who is on here. :burnout::burnout:

What is the easiest way to tell what ratio that my stock small block rocker arms really are ? I know mopar syas they are 1.5 ? I have heard they really very to as low as 1.3 ? I have a 292/509 cam in the 360, I don't really want to open my wallet for roller rockers. I do know many people have...