Search results for query: *

I have a '68 Barracuda that I'd like to add a Hellwig sway bar to. I have the '73 and up V8 k-member and no provisions on my lower control arms for the end links. Is 55905 the correct part number for my application? I called Hellwig, but their tech support told me I needed 55914 which appears...

I have an issue with my power steering pump not lining up. The belt going to the alternator is fine, but the steering pump pulley sits probably 5/16" behind. I know there are different brackets, pumps, etc. and I was hoping someone could help identify what I have and what I need. The motor...

My steering column is not constructed correctly. There are two screws that look like they should hold the collar onto the column, but there is nothing for them to screw into. I can stick a screw driver completely in the hole and never touch anything on the other side. In this picture you...

I've never had any before and the ones I have now are too pressurized so the rear end of my car is jacked way up. Everything I've read just talked about using what you'd use with a tire valve, but the connections on my shocks are bigger than that. I'm sure there is a simple solution, but...

My column shift lever fell out (in park) because there was no pin in it. Obviously, I need a new pin, but is there a certain way that it installs? I couldn't find an exploded diagram so I wasn't sure how it all goes back together.

I just purchased the FR1506P coupler for my power steering column/box and I'm confused on the directions. It says to cut off 1.5" and then slide the coupling on another 2". Obviously, I don't have 3.5" to work with. The directions that came with the coupler are labeled FR1506M so I...

I am installing a spring offset kit this weekend. I ordered the kit from US Car Tool that uses the factory spring hanger mounts to locate the brackets. Unfortunately, I don't have any of those bolts. Can anyone tell me what size bolts (length and thread pitch) they are? I just need to pick...

I'm swapping an 8.75 into my '68 notchback and the perches on it are already set for inboard springs. My car is not set up for that and I don't have subframe connectors either. Should I just go ahead and cut the frame and install new spring boxes or would I be better off just welding new...

I recently bought a '68 Barracuda that doesn't have many original parts on it. The front suspension is well worn and needs an overhaul, but I need to know what parts to order. I know it has the 5x4.5 bolt pattern, but that's about it. I was looking at PST's website and even their basic kit...