Search results for query: *

So i have a 72 318 in my 68 valiant. Its .030 over with a mild cam that i got from a guy about 8 years ago. Ran good but i wanted to give it a little more hp. So i had a set of 302 casting heads that i had redone at a local machine shop. Stock everything. I put them on with a ld4b intake and...

This isnt a abody. But i have a 92 dodge d250 with a la 360 in it. The heads were cracked so i took them off and put on a fresh set of 302 casting heads on it. Everything is in tge truck now. It cranks but cranks fast. I checked compression and the dial doesnt even move.

I know this isnt an Abody but i Have a big question. So I pulled the motor on my 92 d250. It has 3 bent pushrods, and the intake valves were stuck shut. ( I just got the truck like that) I took everything apart and the bottom end looks good. the heads on the other end arnt. I managed to get the...

I will be pulling my mild built 318 to put a set of 302 heads and a LD4B intake. Plus a high flow water pump. I was Thinking on replacing the oil pump and just checking everything on the bottom end. Is there anything I should check while its out or improve on. Its just bored .30 over from the...

So my brother took my valiant out for a spin yesterday and told me he bottomed out on the road going over a bump and faster speeds. Today when I started it I saw oil leaking out the bottom onto the ground. Like a steady stream. This goes on for about a minute than it stops (I made sure I wasnt...

I know aftermarkets are different but are stock the same size ports or will it make my 318 run like a dog. I picked up anther project and its a 2bbl. I want to switch to a 4bbl carb. Thanks

I was wondering how much hp would I be making on my 318. I have a mild built 318 thats .30 over. The pistons look like stock style ones. Crane mild cam. I just put a set of 302 casting heads that i put the bigger 1.88/1.60 valves in. I also put a LD4B intake on it with an Eddy 4bbl 600cfm carb...

So this is my question. I have a 318 thats mild built with edelbrock 4bbl 600cfm carb, performer intake, hooker super comp headers, and mild cam. Runs pretty good. But I like everyone else want more out of it. I picked up a set of 86 302 heads that came off a roller block but arent roller heads...