Search results for query: *

Hi looking for small block rocker shaft shims. enough shims to do both both sides. 015 shims should work Thanks Jim Can pay with PayPal Shipping to Boise Idaho 83709

Hi working on a 1990 360 Need the cam plate w/ 3-bolts and oil sling tab Complete La oil dip stick tube assembly Crank keyway Shipping to Boise Idaho Can pay with PayPal Thanks Jim

Hi, Have a 1990 360 with factory windage trey. Looking for the hardware that holds the trey to the main caps. I can’t remember if it’s a washer and a bolt or studs and a nut. Can pay with PayPal Shipping to Boise ID Thanks

Hi looking for: Small Block Timing Chain Cover, Water Pump and Oil Pump Bolts. I have searched high and low and cannot find them. Can pay with PayPal Shipping to Boise Idaho 83709 Thanks Jim

Hi looking for a bolt in A-body driveshaft loop. ‘67 barracuda If you have one laying around let me know. I can pay with money order or Venmo. I don’t have PayPal, tired of giving them money. Shipping to 83709 Thanks

Have a ‘90 Pre Magum Factory Roller cam La360 block. Looking for a new set of solid roller lifters. Isky, Crower, Bam etc. Pushrod oiling .800 or bigger wheel High pressure axle oiling If your a dealer, know a dealer or happen to have a new set let me know Thanks Jim

Looking for a fuel pump eccentric for a 360 Shipping to Boise Idaho 83709 Can pay with PayPal Thanks

Looking for a vintage shifter ball that would thread onto a B&M shifter. It seams like there were a couple of them for sale here a year or two ago. paypal ready Shipping to 83709

Hi have a 67 Barracuda and looking for a set of Torque boxes shipping to Boise Idaho 83709 PayPal ready If trades or partial trades interest you this what I have. Full description in the suspension for sale forum New Hellwig 55917 Front Sway Bar Lower Control Arm Package

Looking for the correct grommet and PCV valve for small block aluminum mopar performance valve covers PayPal ready Shipping to 83709

Hi looking for a set of subframe connectors for my ‘67 Barracuda. Something like the Hochkins 4014 shipping to Boise Idaho 83709 PayPal thanks

Looking for a belt drive vacuum pump kit for a small block like Moroso or similar. Brackets to mount on the drivers side. I would like to drive the pump with a V-belt off the water pump pulley if possible. Vacuum breaker, catch reservoir… shipping to Boise Idaho 83709 Can pay with PayPal

A long shot but thought I would ask before buying new. Looking for a set of small block TTI shorty headers and a set of there down pipes to a TTI exhaust kit header number 34025 shipped to Boise Idaho 83709 PayPal ready

Looking for a set of TTI shorty headers and a set of there down pipes to a TTI exhaust kit header number 34025 shipped to Boise Idaho 83709 PayPal ready

Looking Holley 4150 style 650cfm Double Pump Carburetor. Must be a working carb with zero issues. If you have one taking up space let me know. On a budget too Mechanical choke or no choke is ok Mechanical secondaries Square bore No proform bodies shipping to Boise Idaho 83709 Pay with PayPal

Hi, Just purchased an Edelbrock Performer RPM intake and was surprised to find the thermostat housing and tstat I removed from an Edelbrock Performer would not fit (To Small). Looking for: Date Range when Mopar used the larger housings and tstat Large style thermostat housing (Non Chrome)...

Hi putting together a budget 360 and thought I would see if there are some parts laying around before calling summit pro shop. please include condition, how much use, part number and a picture if possible. can pay with PayPal Shipping to 83709 Adjustable timing chain. Minimum 4 degrees 1.5...

Hi I have a late 70’s 360 in a 67 Barracuda. looking for a proven set of single groove water pump and crank pulleys. shipping to 83709 Thanks

Hi looking for a set of ready to run heads to put on a 360. No projects, valve job complete with springs or new Looking for aluminum or 2.02 iron heads Would prefer 65cc, 170 to 190 shipping to 83709 Under a 1000$ including shipping PayPal or Moneyorder thanks

Looking for a harmonic balancer for a 360. Must be external balance, clean and in excellent shape. Aftermarket is ok to as long as it fits the OE timing cover. Also looking for an installation tool or at least a part number of a tool that will remove and install. Paypal ready Shipping to...

Looking for a 360 B&M Flexplate. Can pay with PayPal Shipping to 83709 Thanks Jim

Hi, I am looking for a couple things.. Ignition switch electrical connector with terminals or preferably a pigtail New blower motor switch with electrical connector with terminals or pigtail Headlight electrical connectors with terminals or pigtail New taillight sockets New Hi/Lo Beam switch...

Hi I’m installing a dash from Classicdash the company that builds them to accept autometer gauges. I’m wondering if somebody has a 67 gauge housing they would be willing to cut off the heater switch portion and sell it to me. I would cut mine but it’s committed to another member. They don’t...

Looking for a 3.23 gear ratio tag and with sure grip if that’s an option. Have a 2.94 tag to trade if interested. Can pay with PayPal Shipping to 83709 Thanks Jim

67 Barracuda Antenna Collar and Nut. Looking a pair in excellent shape and not beat up. Can pay with PayPal Shipping to Boise Idaho 83709

Looking for options on a set of black vinyl floor mats to fit a 67 barracuda. Just need to be in good shape with a mopar reference. Would need to ship to 83709. Can pay with paypal. Jim

Looking for ‘67 Floor Shift Steering Column Collars / Bowls for a manual steering column. The two pieces just behind the steering wheel. can pay with PayPal thanks

Looking for 4 more belt molding clips for a 67 Barracuda . Bag I bought has fourteen instead of 18. Can pay with PayPal, shipping to 83709 thanks

67 Notchback Barracuda Looking for a complete set of clips (10 I believe) that go inside the metal roof rail trim. Can pay with PayPal Shipping to 83709 thanks Jim

Looking for a turn signal arm for a ‘67 Barracuda column. Can pay with PayPal