Search results for query: *

AED stainless dual feed 6an line for double pumper carbs. The bowl fittings and gaskets have never been installed, the rest of it was bolted on a carb for a week but never even used so it's all 99% brand new, just bought it a few weeks ago. I sold the carb so I ended up not needing this. Has...

AED #60945BKU stainless dual feed 6an line for 4150 carbs. The 7/8-20x6an bowl fittings have never been installed, the rest of it was bolted on a carb for a week but never even used so it's all 99% brand new. I sold the carb so I ended up not needing this. Has gauge port. $48 OBO with free...

I have a whole set of Comp cams #829 BB/Hemi roller lifters with the link bars, they only have a 1000 street miles or less on them, no racing. My motor had a small issue that hurt one rocker arm/lifter/pushrod, I was in a hurry and bought a whole set of lifters for $520 before I realized Summit...

Stainless 2" Gen2 Hemi headers with 3" collectors. The collectors are the expensive merge style and they have the awesome V-band flanges on the ends. Makes me sick to sell these, they were custom built for the car and the welds are amazing show quality. They were built around a Magnum Force...

March serpentine crank pulley, 3"X6", and 2 Powermaster alternator serpentine pulleys, each have a slightly different backside depending on which one your alternator uses. Selling as a set for $70 OBO shipped(free shipping). Add $10 if your in California though, shipping prices have been crazy...

31 spline slip yoke, only used for about 4 months. It's for a 1330 driveshaft. Has a 1330/7290 conversion u-joint. This came out of a Tremec transmission. $60 shipped from 44305

PowerMaster Mopar hi-torque mini-starter, only used for about 3 months. I thought it was acting funny so I installed a new one, problem ended up being my starter relay so I just left the new starter on the car. I even paid 'Automotive Electric' in Akron Ohio to check this powermaster over and...

9" tube style fuel level sender, 70/10 ohms. I jumped the gun and bought a new sender for over 100 bucks before I realized I had the wrong gauge for this sender. Comes with wiring directions and calibration directions. Bolt pattern is a 5 bolt, with new screws that are about 2" apart, and a...

Autometer #4816 carbon fiber light weight 2 5/8 fuel level gauge, 240/33 ohms, electric analog. I bought the wrong gauge for my sending unit. Comes with mounting bracket and hardware as pictured. Paid $85 plus tax. $55 shipped from Akron Ohio 44305.

New Wilson Manifolds #024110 one inch black CNC billet aluminum tapered carb spacer for 4500 Dominator. Paid $160 for it and don't have enough hood clearance. $125 shipped(free shipping)

AED custom gas 1150 Dominator with black performance coating. I bought a project car that's been being built for 10 years, he ordered this carb brand new, broke in his new motor, and then cleaned and dried the carb and set it back in the box, car still isn't done so the carburetor is still...

727 Deep transmission pan with aluminum pickup, all hardware needed, drain plug installed in pan, large magnet in pan, brand new filter and gasket included. Comes with everything needed to bolt it on and go. $65 shipped from 44305.

Stock A-body leaf spring front brackets and rear shackles off a '72 Duster. $30 shipped from Akron Ohio 44305

8 3/4 pinion snubbers in excellent condition, rubber bumpers look great. $22 each, free shipping to the lower 48. Paypal only.

1/2" RH fine-thread screw-in axle studs, 2" length. Like new, I ended up having to go to 3" studs due to having wheel spacers. $19 shipped

VERY NICE pinion snubber for 8 3/4 rearend. $26, free shipping. Akron Ohio

8an Aluminum filter, only has 75 miles on it, it can easily be taken apart and cleaned every year. Has 8AN socketless fittings with it. 4150 chrome dual feed with gauge port, used for about 75 miles on my car before changing my whole fuel system. Comes with all fittings to connect it from a...

SOLD Transmission cooler, about 5.5"X11" plus bracket area. Came out of my big block Duster, comes with everything needed to hook it up to your car, even the 1/8"NPT-3/8" fittings that go into the transmission. The lines are actual trans lines, not just cheap rubber. Was only used for 3 month...

45" from center of u-joint cap to center of u-joint cap. Nice clean driveshaft with new solid rear 7290/1330 u-joint. It fits into a rearend with a 7290 yoke. Came out of my big block Duster with a 727 and 8 3/4 rearend with 7290 yoke. I'm ordering a 3.5" driveshaft with 1350 u-joints so this...

SOLD Empty 489 case for 8.75 rearend in great shape. $SOLD picked up in Akron Ohio 44305, or I can ship, buyer pays shipping. Paypal only.

3.23 cone type posi center section with the big 7290 yoke. Housing is a 488 which is the same as a 489, just kinda rare to see. New pinion seal installed. Does not leak or make any noises. The rearend this center section came out of sat in a garage for 20 years filled to the top with gear oil so...

New Mallory fuel system, parts have been mocked up on a car but never used and never had fuel in them. Mallory 4140 fuel pump(140 gpm) with Mallory 4207 fuel pressure regulator and Mallory 3140 Fuel filter. These are top quality parts and the 4140 fuel pump is known for being quiet. $300...

Delete

New black/stainless Derale 15" heavy duty flex fan, these are the best and safest flex fans, blades are re-inforced so they move a ton of air at idle and still flatten out some at full throttle. I bought this brand new yesterday and realize I can fit one size bigger in my shroud. $30 shipped!

Brand New Pertronix #71385 IgnitorIII conversion kit! Box only opened one time to take this photo. This will convert your points distributor to a 2 wire electronic ignition with an adjustable rev limiter! Fits big block, small block, and even Hemi. NO IGNITION BOX required! Features 5 times...

10" x 3" New chrome air cleaner with Accel Kool-blue washable air filter, 4" total height. $40 shipped

New 9" x 2" air cleaner with new K&N X-stream lid, this will flow alot of air in a tight space. Chrome flat base. Comes with stud and wing nut. I paid $100 total. $48 shipped

Pertronix D7500702 module with rev limiter, brand new in factory box, never installed or test fitted. This is a replacement module for IgnitorIII distributors and is a great idea to have as a spare in the glove box or tool box.These retail for $130. $90 with free shipping!

Sold! Brand new stainless steel Borla XS street mufflers, part number 40359. Offset inlet, center outlet. I paid $192 for them last night, slipped them on with a Walker band clamp, fired it up and they were louder than what I wanted for my street car that doesn't have a crossover pipe or...

Stock pinion snubber for 8.75 rearend, comes with factory bolts. Came off my Duster but I believe it fits all 8.75 rearends. $30 shipped, prefer paypal. Located in Akron Ohio