Search results for query: *

I messed up the adjustment on my kickdown band adjustment. Now I get slipping when I kickdown frm 3 to 2. Does that mean the adjustment screw is too far in or out?

I posted a while back that I thought I was developing too much heat in my rear. It is a 68 Barracuda with a 8.75 sure grip. refresher- This was a new rebuild about 5 years ago. It has sat around since then until I put the car together last year. Of course the guy that rebuilt it really...

No this isn't a *** rated question. How hot should your rear get with normal driving? I took my car out for about 15 miles and brought it home and put it on the lift. The rear end was hot enough that I couldn't hold my hand on it. As I worked my way down the axle tubes it got better. I...

where's a good place to get a speedo gear for a 727? my speedo is off and I need a bigger gear. I looked in Jegs and ebay with no luck

I know there is a 7 1/4 rear and an 8 3/4 rear. Is there such a thing as an 8 1/4? I have seen descriptions of 2 different cars for sale recently that say 8 1/4 rear.

I replaced the 904 with a 727. I have a console shift. The bracket that mounted to the old 904 that held the rod in place on the console shifter doesn't see to work for the 727. There isn't anyplace to bolt it to the 727. (the 904 had 2 bolt holes) Do I need a different piece?

My engine builder tells me the trans dipstick off my old 904 won't fit the new 727 tranny. Is thatthe case? Where is the best place to get one if that is the case. $50 from summit for a chrome one sounds like alot to me for a dipstick.

I have switched frm a 904 to a 727. I need to shorten the driveshaft and I need a new slip yoke. YeaR oNE LISTS 2 yokes for this application. One uses the small 7260 u joint and one uses the larger 7290 u joint. I would assume that since this was a 904 driveshaft I probably want the smaller...

I am switching to a 727 from a 903. I got the motor and tranny in today and I measured the driveshaft needed. It looks like I need to shorten it about 6.25 inches. does that sound correct? Who sells the driveshafts? should I look a buying a new one vs. shortening mine. There is a place 30...

Was it possible to get an 8.75 rear originally in a 68 barracuda? I am talking from the factory.