[SOLD] ‘65 273 INTAKE

[RandyB]

Recently purchased a 1965 Plymouth Barracuda and in NEED of an intake (that has the right angle), to fit the 273 it has. AFB would be great. Edelbrock D4B or ANYTHING that would bring this fish to life!
Serious $$$ burning a hole in my pocket for the RIGHT intake.
Any help here please

 

[SGBARRACUDA]

Make sure it is a 65 intake you need. Looks like from the picture that you have a 66 or newer top end.

 

[RandyB]

Make sure it is a 65 intake you need. Looks like from the picture that you have a 66 or newer top end.

Really? A 66?
Damn, that would make it a lot easier!
I’ll have to run casting numbers I found on the intake

 

[SGBARRACUDA]

Yes check the casting part number to be sure.

 

[RandyB]

Yes check the casting part number to be sure.

Number is
2483252

 

[RandyB]

Yes check the casting part number to be sure.

I’m new to the barracuda world

 

[SGBARRACUDA]

The correct part number is 2463252. From what I can find out it is a 1965. But I’m sure others that know more will chime in.

 

[RandyB]

The correct part number is 2463252. From what I can find out it is a 1965. But I’m sure others that know more will chime in.

Thank you. I’ll keep looking for something to give that fish some get up and go

 

[66fs]

I may have an Offy Aluminum spread Bore dual port intake that you can use on a 64-65. What size wrench fits the intake bolts?

 

[RandyB]

I may have an Offy Aluminum spread Bore dual port intake that you can use on a 64-65. What size wrench fits the intake bolts?

I’ll go out and check after I feed the dog
Back in a few!!

 

[RandyB]

I’ll go out and check after I feed the dog
Back in a few!!

Just checked, 1/2”

 

[66fs]

OK 64 and 65 only. I'll check the on my Offy intake.

 

[RandyB]

OK 64 and 65 only. I'll check the on my Offy intake.

Oh man, that would be fantastic!!
Thank you very much!
Hopefully it’ll work and then I’ll send $$$

 

[RandyB]

I think I’m golden here guys. Dumbass me didn’t bother taking off my carburetor to see what I have to work with!!!! I’m thinking all I need is an ad, and either a bigger 2 barrel or a 4 barrel to slap on!!
Thoughts?

 

[davescuda]

I have an correct intake not cheap
send pm

 

[RandyB]

I have an correct intake not cheap
send pm

View attachment 1715581698

I’ll see what I can do with mine but thank you

 

[66fs]

Offenhauser Dual-Port intake. Counter bored for 66 up heads, but by using washers they can be used on 64-65 heads. McMaster-Carr

 

[RandyB]

Offenhauser Dual-Port intake. Counter bored for 66 up heads, but by using washers they can be used on 64-65 heads. McMaster-Carr

View attachment 1715581787 View attachment 1715581788

View attachment 1715581789 View attachment 1715581790

View attachment 1715581791 View attachment 1715581792

Picked up what I needed but thanks anyway

 

[eekvonzipper]

Picked up what I needed but thanks anyway

So, What Did You Do?

 

[RandyB]

I got ahold of an Edelbrock D4B intake and an Edelbrock carb, just have to find time to start putting it together.

 

[eekvonzipper]

I got ahold of an Edelbrock D4B intake and an Edelbrock carb, just have to find time to start putting it together.

View attachment 1715590172

View attachment 1715590173

Great Upgrade! Can you weld? I just made This out of two air cleaners...

 

[RandyB]

Great Upgrade! Can you weld? I just made This out of two air cleaners...

View attachment 1715590397

Nope, can’t weld
Looking now for proper air cleaner !!

 

[toolmanmike]

I got ahold of an Edelbrock D4B intake and an Edelbrock carb, just have to find time to start putting it together.

View attachment 1715590172

View attachment 1715590173

You need to close your want ad then by marking it "found" just below the right side of the title on your first post.

 

[RandyB]

You need to close your want ad then by marking it "found" just below the right side of the title on your first post.

 

[RandyB]

Will do, thank you