[WANTED] .040 or .060 Speed Pro/Sealed Power L2388 pistons

[Charlie_es_cool]

Looking for a set of .040 or .060 over L2388 pistons

 

[Big.J.007]

I have a set 8 of these ICON pistons I will be listing for sale. They are .60 over and have reconditioned 440 rods attached. We went a different direction on our build. They have 1500 miles on them and are in great condition. Compression ratio with .39 head gasket and 78CC head is 10.5 to 1

 

[Charlie_es_cool]

I have a set 8 of these ICON pistons I will be listing for sale. They are .60 over and have reconditioned 440 rods attached. We went a different direction on our build. They have 1500 miles on them and are in great condition. Compression ratio with .39 head gasket and 78CC head is 10.5 to 1

View attachment 1716271106

Hmmmm I'll have to give it some thought. I'm looking for 440 pistons to use in a stock stroke 400. The compression height on those would put them .040-0.050 above deck on my block. Might be a little too much.

 

[oldkimmer]

What cd r u looking 4?

 

[Charlie_es_cool]

What cd r u looking 4?

I was thinking something between 1.91 and 1.93. Silvolite 1276 would fit the bill, and might not even require a re-balance with a light pin, but it's a cast piston. I could use a cast piston, but I wanted to see what else is out there. Don't want to use KB hypers due to their gigantic 8cc valve reliefs.