1/4 mile estimate

[Oldschoolcuda]

Could anyone give me an estimate of 1/4 mile time and mph. Plan on taking my Barracuda to the track for the first time. Do not know horsepower figures but this it what I have.

65 Barracuda about 3200lbs with me in it
1971 stock bore 340
mildly ported X heads
Lunati Voodoo cam 474 lift int. 494 lift exhaust
Edlebrock performer rpm manifold
Edlebrock eps 800 cfm carb.
Holley 97 gph fuel pump
Hooker super comp fenderwell headers
Moroso electric water pump drive
Flexalite electric fan
TCI 904 trans with manual valve body
2800 stall converter
frame connectors
superstock springs
8 3/4 with 3.55 sure grip
Nitto 205/55r14 drag radials

Thanks

Oldschoolcuda

 

[Oldschoolcuda]

Finally got my cuda to the track and ran a best in 1/8 of 8.26 at 84.8 mph. Very pleased. I guess this would be in the 13's in the quarter. I am hooked. Still counting blessings nothing broke.

Oldschoolcuda

 

[340Dart]

8.26 in the 1/8 is about 12.6-12.7 in the 1/4.

Fred B

 

[Kevin D.]

Old school I am getting ready to go to the track also with my dart.It will be the first time in 36 years for me to stage and make a pass.Last time in early 70s.My dart is about same set up only 3.90 gears and I would be happy with those numbers.Thanks Kevin.

 

[crackedback]

Hooking, 12.60-12.80 at about 106-107

 

[Oldschoolcuda]

Thanks for the 1/4 mile info. found the 1.58 multiplier to go from 1/8 to 1/4. Plan on taking it to mopar madness in august and will be excited if I can get in the 12's. I had'nt been to the track in 18 years & have never run in the 1/4.


Oldschoolcuda