15x10?

-
You'll need the right backspace too unless you plan to chop out the rear quarters like the 68 SS hemi cars. I recommend 6-1/2" backspace on a 10" wheel, but I don't know if thats an "off the shelf" measurement or if you'll have to have them made. I guess it depends on what wheel you're buying.

Good Luck.

George
 
On my 1970 Dart I added the mini tubes, moved the springs under the frame and had the differential narrowed to 51" drum to drum if memory serves me correctly. With this I can fit 15x10 rims with 4.5 inches of back spacing. I have run 15x28x11 slicks and N50 15 street tires which are around 27" tall.
 
I did a mini tub & triangulated 4 link and got 325/50/15's on a 10" Steelie Wheel with 5.5 Backspace. I did Narrow a B Body Rearend 3 3/4" on each side and they sit dead center in the wheel well. This puts right at 12" of rubber on the ground. This is on a 67 Dart GT.

Here is a link that shows the whole process of what it took me to do the Mini Tub, 4 Link etc.

http://www.forabodiesonly.com/mopar/showthread.php?t=101437
 
On my 70 Dart, I had A narrowed Dana 60 built to 49 5/8" disc to disc, I did a mini tub job and spring relocation and I have two sets of wheels: 17x11 with 4 1/4" backspace with 315/35/17 tires. The second set of wheels are 15x10 with 3 3/4" backspace with 295/50/15 tires...
 
Yes, take your pick here. The Mancini one is Just like the more expensive MP unit accept it is $53.00 Cheaper!

If you have the ability to make your own that is the cheapest way. I have a whole $12.00 into my front hangers.
There is also a member here that sells them Laser cut for I think $40.00, you will need to do a search. You would also need the spring perches that go on the axle and the rear hanger assembly. If you piece it together you will save a little but maybe not so much with shipping compared to the kit already done.

http://chucker54.stores.yahoo.net/sprinrelkit.html
 
Is there a reason why you need to buy new rear shackles? I wonder how much the spring perches are...... need to start price shopping :D
 
In run a spring relocation kit on my Scamp with a narrowed rear axle, mini tubbed and I fit 28 x 13.50s DOT ET streets. If you buy a MP kit it will come with the rear shackles, tubes for the rear frame and boxes made for the front hangers, plus directions.
 
You must log in or register to reply here.
-

Back
Top