[SOLD] 1966 Barracuda Top Fender Mount Turn Signal Bezels

-
Status
Not open for further replies.

ZooKypr

Well-Known Member
Joined
Jul 5, 2009
Messages
2,079
Reaction score
273
Location
NJ
Rating - 100%
31   0   1
Contact seller
1966 Barracuda fender top mount turn signal bezels - PAIR
Bezels only. Used, a few tiny pits, peppering / hazing
Mounting prongs are intact which is very important because these act as the ground connection to the fender to make these signals function.
$85. + shipping.
PayPal (add 4% for fees) or USPS money order.
upload_2018-4-25_18-41-40.png

upload_2018-4-25_18-42-19.png

upload_2018-4-25_18-42-41.png

upload_2018-4-25_18-43-23.png

upload_2018-4-25_18-43-51.png

upload_2018-4-25_18-44-34.png

upload_2018-4-25_18-44-55.png
 
Years ago I had an issue with one of my signals and turned out that the JB Welds repair to a prong interfered with grounding the light. The screw & ground plate don't touch the fender. I believe they may work in conjunction with the bezel thru the prong.
 
Last edited:
Hmmmm, funny thing I tested my lights without the housing, I plugged the wire in and grounded the plate with the screw. Thanks
 
Of course it would light up, the plate was touching the screw which was in contact with the fender. When the plate is screwed in, it does not make contact with the fender also the bulb socket has a black foam or rubber insulator on it to prevent from shorting when its installed into the hole. This is where the "bezel prong" comes into play as the screw, screws into the ground plate and the threads of the screw are in the bezels thus the ground contact point is the prong touching the fender.
But no more replies, this is a "for sale ad" and I do not want the mods to take it down.
 
Status
Not open for further replies.
-
Back
Top