chickendeluxe
Well-Known Member
LOTS Here! and now rolling close to drive.
Nice solid Rolling 1967 Barracuda Convertible with Freshened 318, Console 4 sp, 8 3/4 323 489 Limited Slip.
Original 273, was console auto Barracuda convertible.
Red w Black from Factory.
Car is Cut in R4 Red....Trunk, Door Jambs, Engine Bay.
Undercarriage Undercoated with Raptor Liner.
I replaced Floor and added US Car Tool Connectors. All Raptor Lined Under, Sound Deadener on Floor..
Added 4 speed Hump and leveled correct 4 Speed Console.
Passon Rebuilt Pedal Assembly.
Brewers Shifter w/ Rechromed Hurst Console Shifter.
1968 Barracuda A833 with new seals and nice internals...have pics.
New Luk Clutch, PP, Bearing, Resurfaced OEM Flywheel.
Aluminum 10.5 Bellhousing.
Freshened 1972 318 w new rear Main and Gaskets and Seals.
Port Matched Heads and lapped valves, new seals.
430/450 Purple Cam w new Lifters,, Chain, Tensionser
Performer Intake w 600 cfm Edelbrock.
MP Distributor with nice curve, Chrome Box,
Bill Evans Electonic Dual Field Electronic wiring harness with Primary Headlights harness, New Battery Harness, Mini Starter.
Hooker Ceramic Competition Headers,
Completed New Front end with 73 up Control Arms and Slider Disc Brakes, New Lower Control Arms Rubber and strut Rod Bushings, new Ball Joints, 340 A body Torsion Bars new clips and Boots
8 3/4 Blasted and Painted, with 323 489 Limited Slip with Moser Axles, 10.5 Drums new brakes and lines, e brake cables.
Big Bolt Across with later Big Bolt Drilled Slotted Rotors/ Calipers and rebuilt Front end. MP Leaf Springs w new hanger bushings, KYB Shocks
Rust Free Fenders off car for Final Prep. Doors Hung and Cut in. Good hood in epoxy that needs finishing.
Grilles are getting restoration finished.
Original Core Buckets and rear seat. Good Rear Door Panels.
Top worked great and I have Not removed but a bit shrunk.
$17,500 offer
Nice solid Rolling 1967 Barracuda Convertible with Freshened 318, Console 4 sp, 8 3/4 323 489 Limited Slip.
Original 273, was console auto Barracuda convertible.
Red w Black from Factory.
Car is Cut in R4 Red....Trunk, Door Jambs, Engine Bay.
Undercarriage Undercoated with Raptor Liner.
I replaced Floor and added US Car Tool Connectors. All Raptor Lined Under, Sound Deadener on Floor..
Added 4 speed Hump and leveled correct 4 Speed Console.
Passon Rebuilt Pedal Assembly.
Brewers Shifter w/ Rechromed Hurst Console Shifter.
1968 Barracuda A833 with new seals and nice internals...have pics.
New Luk Clutch, PP, Bearing, Resurfaced OEM Flywheel.
Aluminum 10.5 Bellhousing.
Freshened 1972 318 w new rear Main and Gaskets and Seals.
Port Matched Heads and lapped valves, new seals.
430/450 Purple Cam w new Lifters,, Chain, Tensionser
Performer Intake w 600 cfm Edelbrock.
MP Distributor with nice curve, Chrome Box,
Bill Evans Electonic Dual Field Electronic wiring harness with Primary Headlights harness, New Battery Harness, Mini Starter.
Hooker Ceramic Competition Headers,
Completed New Front end with 73 up Control Arms and Slider Disc Brakes, New Lower Control Arms Rubber and strut Rod Bushings, new Ball Joints, 340 A body Torsion Bars new clips and Boots
8 3/4 Blasted and Painted, with 323 489 Limited Slip with Moser Axles, 10.5 Drums new brakes and lines, e brake cables.
Big Bolt Across with later Big Bolt Drilled Slotted Rotors/ Calipers and rebuilt Front end. MP Leaf Springs w new hanger bushings, KYB Shocks
Rust Free Fenders off car for Final Prep. Doors Hung and Cut in. Good hood in epoxy that needs finishing.
Grilles are getting restoration finished.
Original Core Buckets and rear seat. Good Rear Door Panels.
Top worked great and I have Not removed but a bit shrunk.
$17,500 offer
Last edited:
