1967 Dodge Dart Jack tool position
- Thread starter nsantos1
- Start date
-
Correct position but not the correct jack. (OEM 67 Dart)
67 factory parts book
- Joined
- Dec 16, 2006
- Messages
- 431
- Reaction score
- 42
Dana67Dart, is that the correct jack position for a 67 Barracuda as well?
From a 68 Plymouth Valíant according to the gettlement
D
(side note: the barracuda uses a different jack per the 67 parts book)
Does the hook come off the jack head?
67 Hook
The hook on the Jack you are looking at (it is shorter, from pivot to top)
Looking at the part number of your other hook in the Little red coffin ad (I assume that is where you got your other jack)
it is the same part number as the 67 parts book calls out for.
so if the hook comes off the jack you are looking at, you should be able to use your other hook on the jack your looking at.
Don't know, sorry
(side note: the barracuda uses a different jack per the 67 parts book)
It looks closer, the upright, jack head and base look correct.
Does the hook come off the jack head?
67 Hook
The hook on the Jack you are looking at (it is shorter, from pivot to top)
Looking at the part number of your other hook in the Little red coffin ad (I assume that is where you got your other jack)
it is the same part number as the 67 parts book calls out for.
so if the hook comes off the jack you are looking at, you should be able to use your other hook on the jack your looking at.
-
