1967 Dodge Dart Windshield Trim

[Jan]

Hi,

i also search for my 67 dart coupe the windshield-trim.
there are two different types to buy.

type 1:

http://www.ebay.com/itm/68-76-Dart-...:Dodge|Model:Dart&hash=item3a7ca71ccf&vxp=mtr

this type is for 68-76. not for my 1967 Dart. but the seller told me that i Must Used 1968 & Up Molding-Clip Style. does it excactly fit to the 1967 dart and where do i get the right molding-clip style?


and here is another type that is really cheaper:

type 2:

[ame="http://www.ebay.com/itm/1967-68-69-70-71-72-Valiant-Dart-Barracuda-Cuda-Windshield-TrimStrip-Trim-/221332739113?pt=Vintage_Car_Truck_Parts_Accessories&hash=item3388759429&vxp=mtr"]1967 68 69 70 71 72 Valiant Dart Barracuda Cuda Windshield Trimstrip Trim | eBay[/ame]

does someone use this type? do i need molding-clips too?

what is the better alternative? or is there even a better one

greetings

Jan

 

[RedFish]

The coiled plastic material is for the 67 window and gasket.
The ridged reveal moldings are for 68 and later.
They would require clips, the 68 and later rubber gasket which requires glass R&R.
Search should find 100s of threads on this subject.

 

[Jan]

The coiled plastic material is for the 67 window and gasket.
The ridged reveal moldings are for 68 and later.
They would require clips, the 68 and later rubber gasket which requires glass R&R.
Search should find 100s of threads on this subject.

thanks for your answer. then i need the second one for my 1967 dart, right? the 67 dart doesent have any clips?do i need the corner trims too?
i have bought the original 67 rubber gasket.

greetings

Jan

 

[RedFish]

No clips required. Corner pieces are required.

 

[Jan]

No clips required. Corner pieces are required.

thanks. then i need the following,right?

this (or do you have a better link?)

[ame="http://www.ebay.com/itm/1967-68-69-70-71-72-Valiant-Dart-Barracuda-Cuda-Windshield-TrimStrip-Trim-/221332739113?pt=Vintage_Car_Truck_Parts_Accessories&hash=item3388759429&vxp=mtr"]1967 68 69 70 71 72 Valiant Dart Barracuda Cuda Windshield Trimstrip Trim | eBay[/ame]

and the corners:

http://www.ebay.com/itm/1967-A-Body...:Dodge|Model:Dart&hash=item3f310d3f27&vxp=mtr

i have the rubber gasket already.

greetings

Jan

 

[RedFish]

I don't know of another source for these parts.
You could search this forum or wait for other members to reply.
Good luck

 

[Jan]

Sorry. I have looked at my weatherstrip. On the package stands wcr d690. Its for the 1968-69 dodge dart. Not for a 67 dodge dart. But can i use the chrome trim and corners that i posted 2 post over this here???

Greetings

Jan

 

[RedFish]

Sorry. I have looked at my weatherstrip. On the package stands wcr d690. Its for the 1968-69 dodge dart. Not for a 67 dodge dart. But can i use the chrome trim and corners that i posted 2 post over this here???

Greetings

Jan

No sir. That gasket might be one piece self locking design or have a perfectly round lock cord insert. Regardless.. it wont accept with the 67 insert.

 

[48plymouth]

I have a gasket for a 67 dart I got for my for my 67 dart that is in shop to be painted.After the glass man removed my windsheld I had the wrong one.Some one had switched it to the later gaskets and trim.If you need a gasket for a 67 I have one. jim

 

[RedFish]

I've got a used 67 gasket from a no post A-body ( barracuda ).
Make sure you clarify post or no post car.