1968 Dart project 4 speed

-
Status
Not open for further replies.

cjcx3

Twisted Sundance
Joined
Oct 11, 2008
Messages
145
Reaction score
6
Location
CARTERSVILLE GA
Rating - 0%
0   0   0
Contact seller
Remember me? http://www.forabodiesonly.com/mopar/showthread.php?t=47605

This is the 1968 project Dart that is sooooo close to being ready.
The car has new quarter panels, v-8 k frame, new PST suspension including brakes. Small bolt pattern with front disc, 8 3/4 A-Body rear with 3.23 posi. Rebuilt leaf springs with aluminum bushings. EZ wire harness install with the exception of the engine wires( needs engine installed to know how short to cut the wires, wires are labeled). All lights work except side markers. New heater core, new guages, and has a Auto meter tach with shift light. Custom aluminum dash but I still have the original dash. Interior needs carpet and headliner( I had no intent of installing either of these ). Car is ready for a manual transmission. ( hump and pedals installed with the correct steering column) Needs all weather strip. Has a good and clean gas tank with no sender. 14*6 front fenton gyro aluminum slots and 14*7 rear ansen aluminum slots. Tires are good. Car has a clean Mississippi title and a bill of sale. I have never registered this car. I have a boat load of receipts for it.
You can contact me at 678*451*5262 if you are really interested, I aint got time for tire kickers. You can also email me at [email protected]
The price is 7000.00 firm and I can provide almost that in receipts. I did the work on this car so feel free to ask any questions.

IMG_0752.JPG


IMG_0753.JPG


IMG_0755.JPG


IMG_0756.JPG


IMG_0757.JPG


IMG_0758.JPG


IMG_0759.JPG


IMG_0760.JPG


IMG_0761.JPG


IMG_0762.JPG
 
Status
Not open for further replies.
-
Back
Top