[FOR SALE] 1970 340 standard bore bare block

[smokindust]

Standard bore 340 sonic checked and magnafluxed . I have the bolts for the windage tray I will throw in also. 1000.00 no shipping sorry. Also have a stock forged rotating assembly if interested to make a short block

 

[A56]

V.I.N. ?

 

[smokindust]

V.I.N. ?

You want the vin#? I’ll post a pic when I get home tonight

 

[A56]

You want the vin#? I’ll post a pic when I get home tonight

Thanks, the vin may be close to someone who's missing their block, or this may be their missing block.

 

[Lance Lot Link]

In box full, my last 5 digits are 89175. I'm looking for my original block, 1970 Duster.

 

['Cuda_ragtop]

I'm looking for 0B184371

 

[smokindust]

Here’s the vin

 

[PROSTOCKTOM]

I sure can't read it from that photo. Can you type it out for us old guys?

Thanks,
Tom

 

[A56]

appears to be 0B309727 ???

 

[smokindust]

sorry about that. But yes A56 has it right OB309727.

 

[autoxcuda]

Sonic check sheet says #5 cyl needs a sleeve. And says "rusty"

Is there a rust pitting in #5 that is too deep?

Will this block clean up at 0.030" ?

 

[smokindust]

I’ll have to get a close up pic of #5 for you. Im building a W2 340 and I have .040 pistons already that I want to use so I believe he said to me he would recommend to sleeve that cylinder and half fill the block if I was going to make it a race only piece. I have 2 other blocks I’m using one and the other is .030 over already but not selling those. And I had 2 blocks checked so one we called red and the other Rusty. It will clean up at .030

 

[smokindust]

1st pic is 5 2nd pic is 1357 3rd pic is 2468

 

[smokindust]

you can see in the 1st pic why it would need a sleeve. I’ll let it go for 800.00