[FOR SALE] 1970 Dart 28X10.5w

-
Status
Not open for further replies.

boosted

Life Needs Air
Joined
Oct 26, 2008
Messages
1,414
Reaction score
397
Location
Muscogee/Harris County GA
Rating - 0%
0   0   0
Contact seller
Turn key race car.... Not for the less of a man type for sure. 446, forged pistons, 6 pack rads, piston flipped, 906 heads with some port work .590 purple shaft aluminum roller rockers, tm7 intake with an 850 double pumper. Rodgers full built race 727 with a turbo action j convertor. Reverse manual valve body, spoil, 4:56 gears, yukon axles with long studs. 28X10.5w fits under the car. Fiberglass hood with cowl scoop, fender welll headers. Interior needs some cleaning up of the electrical wiring for my taste. msd 6al line lock and on and on. Car is ready to go race now turn key. Dual Holley pumps so you are already to add some nos if need be. I am looking to get as close as I can to $10,000.00 offer up who knows I may take it...

1000002579 - Copy.jpg


1000002580.jpg


1000002581.jpg


1000002781 - Copy.jpg


1000002782 - Copy.jpg
 
Turn key race car.... Not for the less of a man type for sure. 446, forged pistons, 6 pack rads, piston flipped, 906 heads with some port work .590 purple shaft aluminum roller rockers, tm7 intake with an 850 double pumper. Rodgers full built race 727 with a turbo action j convertor. Reverse manual valve body, spoil, 4:56 gears, yukon axles with long studs. 28X10.5w fits under the car. Fiberglass hood with cowl scoop, fender welll headers. Interior needs some cleaning up of the electrical wiring for my taste. msd 6al line lock and on and on. Car is ready to go race now turn key. Dual Holley pumps so you are already to add some nos if need be. I am looking to get as close as I can to $10,000.00 offer up who knows I may take it...

View attachment 1716162720

View attachment 1716162722

View attachment 1716162723

View attachment 1716162724

View attachment 1716162725
ANy time slips?
 
Need paint ajd a little body work. 8 3/4 rearemd with a full cal trac setup. Car will run 6"s in the 1/8th with some tuning Should rum on the 10's in the 1/4 with no problem/
 
How "easy" would it be to make it a street car? I know it's wild, I don't care about that. What about lights and such? Wiring harness?
 
Car comes with the set of fiberglass bumpers along with a 5.7l Hemi out of a local Police car with 42000 miles on it.. Needs a cam but that something we would all change out...
 
Status
Not open for further replies.
-
Back
Top