1974 Dart Manual Swap

[Bairdracing74]

Good afternoon ladies and gentlemen,

So me and my father are the owners of a 1974 4-door dodge dart. My father runs a performance shop and we are attempting to modify the original 225 slant six to make some power. We decided we wanted to slip a t5 transmission into it as opposed to the factory 3 speed. However, i can't seem to find any information on where to acquire the clutch and break pedal assembly for under $500 or a flywheel that will fit the 225. If anybody more experienced in this matter has any information that would help, it would be much appreciated.

 

[junkyardhero]

a pedal assembly is going to run you about 2~3 hundred easy, and well north of that for one that's been rebuilt. so just know that going in. there's a few kicking around on flea-bay and a wanted ad here might unearth one as well.

the flywheel is pretty standards. brewers has reconditioned ones reasonably priced. Brewer's Performance - Mopar A833 4-Speed Transmission and Component Specialists

i think ram clutches sells a new one for about 350.

are you going to make your own adapter for the T5 or buy one?

 

[Bairdracing74]

a pedal assembly is going to run you about 2~3 hundred easy, and well north of that for one that's been rebuilt. so just know that going in. there's a few kicking around on flea-bay and a wanted ad here might unearth one as well.

the flywheel is pretty standards. brewers has reconditioned ones reasonably priced. Brewer's Performance - Mopar A833 4-Speed Transmission and Component Specialists

i think ram clutches sells a new one for about 350.

are you going to make your own adapter for the T5 or buy one?

We've got a bell housing that we are going to modify and adapt for the t5. Yeah I figured there wasn't a lot out there for cheap pedals. I appreciate the information.

 

[Professor Fate]

T-5 Bellhousing Adapter Plate For Slant Six | gillwelding