Hyper_pak
Old School Chrysler Fan
Wrong time to sell, but maybe someone needs these.
I have a cast iron 64-66 273 bell for a 4 speed trans.
And an aluminum 69-72 4-3 speed bell for a 318-340 engine.
No idea on shipping, cast one is heavy.
273 bell is for the 9.5 clutch. $100
340 bell for 10.5 clutch, 3 or 4 speed transmission. $250
No inspection covers.
Brewers said you could open the aluminum one up, turn down the retainer and use the OD transmission. Sounds like a good solution.
Shipping TBD.
PP to friends, PP with protection add %5 percent, MO or check ok.
Located near DFW.
I have a cast iron 64-66 273 bell for a 4 speed trans.
And an aluminum 69-72 4-3 speed bell for a 318-340 engine.
No idea on shipping, cast one is heavy.
273 bell is for the 9.5 clutch. $100
340 bell for 10.5 clutch, 3 or 4 speed transmission. $250
No inspection covers.
Brewers said you could open the aluminum one up, turn down the retainer and use the OD transmission. Sounds like a good solution.
Shipping TBD.
PP to friends, PP with protection add %5 percent, MO or check ok.
Located near DFW.
