273 rockers on Edelbrock heads

[roachmech]

I installed a set of Mopar Performance adjuster screws (with the required mod fro the lock nut )

on my 273 rockers and mocked up on the heads .
You can see the rocker tip sliding off the valve stem at full lift (501") NOT OK

I installed a set of CCA-621-16 .080" lash caps fronm Summit and checked it again. Not perfect but I am gonna run it.

 

[mrhotrod]

Do you have a part number for the Mopar Performance adjuster screws and lock nuts?

 

[roachmech]

Mopar Performance 3/8” Rocker Arm Adjusters Set/16 New P5007444AB
ebay

 

[glockr]

What shaft hold-down blocks are those?

 

[Demonic]

Get a hold of B3 and some longer pushrods.

 

[Kendog 170]

 

[mopowers]

That's gotta be hard on guides. I'd correct the geometry with a kit from B3.

 

[4spdragtop]

 

[dogbreath]

Make sure those lash caps are resting on the valve stem and not the locks.