3 on the tree to 3 on the floor conversion

[BadAss71]

Merry Christmas Fabo! I'm converting my 70 dart over to floor shift from 3 on the tree and have a quick question. I have already picked up the shifter with the rods and levers I need, but I am still lacking the mounting plate and hardware to bolt on to the tail shaft to mount the shifter to. Is this piece 3 speed only, or is it the same mounting plate used on 4 speeds? Any insight is greatly appreciated! And if you happen to have what I need please let me know!

 

[j061093409]

looks like a different plate - only 3 speeds metal . 4 speed is aluminum with 3 allen inset screws
easily obtained from Passion or Brewers

 

[BadAss71]

Are you saying they repop the plate I need for the 3 speed?

 

[BadAss71]

looks like a different plate - only 3 speeds metal . 4 speed is aluminum with 3 allen inset screws
easily obtained from Passion or Brewers

Thanks for the lead on Brewers. Talked to a friendly gentleman there and he dug one up from a pile of 3 speed parts he had in the back. Another missing piece to the puzzle has been found.