318 Build For Aussie Valiant

[JOHNNY MOPAR]

HI GUYS BEEN A WHILE SINCE I HAVE POSTED ANYTHING , SOLD MY RED VC VALIANT AND HAVE RECENTLY BOUGHT A 1964 AP5 VALIANT , IN THE PROCESS OF PUTTING TOGETHER A 318 , NEW RINGS , BEARINGS , HV OIL PUMP , NEW TIMING CHAIN , LUNATI VOODOO CAM 60403 494-513 AND 268-276 DURATION 2000 - 6000 RPM , NOT SURE WHAT TO DO WITH HEADS NEED TOO UP THE COMPRESSION FOR THE CAM , IT IS A LATER FIREBALL ENGINE [ IN AUSTRALIA ] HAD 9;5;1 COMPRESSION RATED AT 230 HP , WOULD LIKE TO RUN AN AIR GAP MANIFOLD AND 650 DP HOLLEY , HEADERS AND 2 1/2 EXHAUST , REBUILT 904 SHIFT KIT 4.2 LEVER , 2200 STALL 3.89 GEARS ANY THOUGHTS , WOULD LIKE TOO DIP INTO THE 13'S

 

[bigtommy]

thats is a sexy car just saying lol

 

[dvs265ap6]

You need to get some keith black pistons kb167 they put the piston at a zero deck height, or you have to deck the block about 80 thou, to do the same. don't put j heads on it as they have 74 cc chambers as aposed to about 64 in stock 318,s. are you a member of hemi6packs.com.http://www.hemi6pack.com/forum/show...-400-horsepower-out-of-a-318-for-3000-dollars