318 intake on a 273?

[nick69]

Will an Intake manifold from a 318 fit on my '67 273 without any mods??

Thanks
Nick

 

[nick69]

Just found allpar.com and it says on there it will fit so jobs a gooden!!

Just been offered an Intake and new 500cfm carb for a bottle of JD!! :drinkers: :drinkers:

 

[69signetv8]

Using a four-barrel on a 273 V8. One source says all of the LA motors will interchange intake manifolds, the other source says, 64-65 V8s had a different angle on the intake manifold bolts, which are unique to those years.

He was answered by Sandy Colter, who wrote: "You are right about the different bolt angle. You can most likely redrill or hog out the bolt holes as they are in the same place different angle. If [the replacement intake manifold is a Edelbrock Torker or 2psp stay away from it. "An LD340 or Edelbrock Performer are OK."

Basiclly, you have a "67" 273. Your safe with the Edelbrock Performer (318-340-360)

I have a 69 273 with it on. Here's a link.

http://www.edelbrock.com/automotive_new/mc/manifolds/chrysler_sb_perf.shtml

 

[nick69]

A chap has offered me a stock 318 intake and new carb. So it should fit no problems then??

Eventually ill go to an Aluminium Intake but ive got to finish my Cougar first!!LOL