340 360 swap

[dazedduster]

Can Anyone Tell Me If My Intake Manifold, Oil Pan, And Pickup Tube
Of My 73 340 Out Uf A Duster Will Bolt On To My 73 360 Out Of My 73 Power Wagon. I Thought The Parts Were Interchangeable Put The Local Parts Store Has Diffrent Part Numbers For The Oil Pan
And Intake Gasket. Any One Done This Swap.

 

[rumblefish360]

Well there corrct. The oil pan is different for the 360. The intake gasket will not matter.

 

[Mrmopartech]

Your intake will bolt on,the oil pan is different and the pick up tube would be differnt too ,because the pan is different.The 360 has a larger rear main cap and seal.Mrmopartech

 

[krabysniper]

When you try to put a 318/340 oil pan onto a 360 their will be a large gap between the pan and the seal/main cap, which makes them incompatible with each other, this is from recent expierence (this last spring when I put my 360 into my dart).

 

[dazedduster]

Thanks for the info, found out about an hour ago when i tried to swap.
eill be ordering a pan tomorrow