[FOR SALE] Small Block Cam Thrust Plate Oil Drip Tray & Bolt

[68HemiRR]

This is a Small Block Cam Thrust Plate Oil Drip Tray & Bolt.
It is original, not a china knockoff, and is in good condition.
Just could use a cleanup. $20.00. Local pickup, or buyer pays
shipping.

 

[badlilred79]

Have you got the bolt

 

[68HemiRR]

Have you got the bolt

I'm sure I do in my parts drawers, but I would have to find it. I will take a look tomorrow.

 

[badlilred79]

It's got the hole in the center find it I'll take it

 

[68HemiRR]

It's got the hole in the center find it I'll take it

If memory serves me right, that's not the bolt with the hole in it. Looking from the front of the engine, I believe it's the upper left bolt that has the hole.

 

[badlilred79]

C correct but you got to have it for that drip rail that's how the oil comes out the drip on it

 

[68HemiRR]

C correct but you got to have it for that drip rail that's how the oil comes out the drip on it

Ill see what I have.

 

[66fs]

C correct but you got to have it for that drip rail that's how the oil comes out the drip on it

Never saw a 340 with a drip plate. The drip plate came later. Every 340 and HP 360 I saw had the bolt with the hole through the center. My time line was only through the mid 70's. Too busy doing other things after that.

 

[68HemiRR]

It's got the hole in the center find it I'll take it

Sorry, but I searched, and have a couple of the bolts, but neither has the hole in it. I know some people drill a 1/8" hole through a regular bolt. Anyway, GLWYS.