340 For Sale

-
Status
Not open for further replies.
M

mopar 1968

Active Member
Joined
Apr 7, 2008
Messages
28
Reaction score
0
Rating - 0%
0   0   0
Contact seller
]For Sale or trade, This is a 1972 340 0.30 over,wiseco 11.5 pistons,manley rods,eddy heads been worked, 533-320 mopar camshaft,adjustable rockers, engine is fresh,Has tunnel ram with two worked 650's , block has head studs not bolts,dynoed at 503 @7000 rpm's also have 727 race trans with 4800 stall convertor,Also has a m-1 intake with a 750 hp that goes with engine, Asking $4000.00 for all or would like to trade for a strong big block engine, run's ok just not any damage to engine, please contact ask for Mark I WILL GUARANTEE THIS ENGINE AND TRANS TO RUN AND WORK CORRECTLY , Can send pics don't know how to post on here !!!

340.jpg


340-2.jpg


340-3.jpg
 
If you guys don't stop offering these deals I'm gonna be divorced!
 
mopar 1968 said:
]For Sale or trade, This is a 1972 340 0.30 over,wiseco 11.5 pistons,manley rods,eddy heads been worked, 533-310 mopar camshaft,adjustable rockers, engine is fresh,Has tunnel ram with two worked 650's , block has head studs not bolts,dynoed at 503 @7000 rpm's also have 727 race trans with 4800 stall convertor,Also has a m-1 intake with a 750 hp that goes with engine, Asking $4000.00 for all or would like to trade for a strong big block engine, run's ok just not any damage to engine, please contact ask for Mark I WILL GUARANTEE THIS ENGINE AND TRANS TO RUN AND WORK CORRECTLY , Can send pics don't know how to post on here !!!
Click to expand...
More info on the motor...Thanks
 
320/320 272/272 @ 0.50 o-lap 104 centerline 108 0.533/0.533 Drag modw/auto trans.
 
6;90's-7;05 depending on heat running 5;13 gear with 29.5x11.5x15 slicks in a 2675 pound Dart, look at the pic to left this is with this engine.
 
Yes i do !! I don't mean to sound like a butt hole but i can't take any less than $3000.00 for the engine only! The head's were over $2000.00 by themselves.
 
Just thought i would bring back to top one more time. Thank's to some of you for the offer's but $1500.00 to $2000.00 won't buy it, the heads alone are that price.
 
Yes I am definitley interested in the engine, I pm'd you my phone number please give me a call for more info
Thanks
 
sounds like a good deal to me, don't see why you have been low balled.

and you seem to be on top of your game at answering peoples questions in full detail ....so i am sure it will sell soon.

Good luck!
 
sorry to take my time replying went a different rout some one should buy this thing please great price and you are right the heads are worth 2000$ looking at what you got great deal for some one good luck with your sale
 
I am seriously interested in the engine
I don't mean to be a jerk asking so many questions but just want to know everything that’s in it like
the Manley rods are they I beam or H beam
Bearings....Clevite...Michigan....
Timing chain...cloyes..edelbrock...
Rockers...factory....roller...harland sharp...comp cams...prw...
Heads 63cc chambers or 65cc
Valve springs...stock eddy's that come with the heads....
Pistons flat top...reverse dome
I have a friend driving done that way at the end of this month and would like to set something up.
Thanks
 
H-beam rods,mopar steel crank, clevite,mopar timing chain,isky adjustable rockers,mopar camshaft,65cc eddy heads,dome ross pistons. Studded block no head bolts.eddy tunnel ram, twin holleys, ATI balancer, B-M flex plate sfi cert.
 
Yes
I want it :cheers:
please give me a call on the phone number I pm'd to you earlier to work out the details
Thanks
 
Status
Not open for further replies.
-

Back
Top