340 SFI Balancer

[jefflock]

I'm looking for a new balancer that is SFI approved that will work with the stock pulleys and not cause alignment problems. Any suggestions???

 

[bOb shingler]

i got a great nos sfi off e-bay for my 318 in the tow truck.

 

[fishy68]

I need the same thing. Hopefully somebody will answer with a brand/part#.

 

[70aarcuda]

http://store.summitracing.com/partd...908110+4294840100+4294871848+115&autoview=sku

 

[Demon416]

http://cgi.ebay.com/ebaymotors/_Car...c0.m245&_trkparms=72:1171|65:12|39:1|240:1318

This damper might fit your needs.

 

[Demon416]

I need the same thing. Hopefully somebody will answer with a brand/part#.

fishy68: Did you check out that damper? Is that what you were looking for? Just wondered.

 

[fishy68]

fishy68: Did you check out that damper? Is that what you were looking for? Just wondered.

Well I know Romac is a real good balancer and it's a good price but it doesn't say the thickness so I'm not sure. That's my main concern cause I have a new March serpentine system and don't want any problems mounting it up. Next weekend is the Indy swap meet and I'm going with my tape measure and see what I can find. Thanks Demon

 

[Demon416]

Well I know Romac is a real good balancer and it's a good price but it doesn't say the thickness so I'm not sure. That's my main concern cause I have a new March serpentine system and don't want any problems mounting it up. Next weekend is the Indy swap meet and I'm going with my tape measure and see what I can find. Thanks Demon

The Romac is a good damper. E-mail the seller and ask for measurements. Otherwise if you don't race your car, just install an OEM damper. They are usually tested at somewhere around 8000 rpms. Hope you find one either way.

 

[jefflock]

Bob, Thanks for the help getting this thread responded to.

 

[perfacar]

hi,BHJ has a dampner that will fit. no spacer problem on my 340.its SFI also.