340 stroker kit??????

[LA Dart]

Who makes a good 340 STROKER KIT??? Hughes engines make a good one for a fair price . I have a 70 340 block and looking to make a 416 out of it.

 

[stroked 340]

Check out Mancini racing...

 

[moper]

I've used Mancini, and Campbell Enterprises, plus bought various sourced parts. Kits are not always the best way to get parts, but it depends on what you want out of it. I would not buy a balanced kit... and assume the parts will need to be checked by you machinist prior to installation.

 

[RobertP]

Im running the indy kit. i got it with the forged crank and eagle H beam rods and wiesco 12-1 pistons. had it all balanced myself.

 

[340sFastback]

Have a good local shop balance it. Usually the "balanced" kits are way off and have to be redone if you want it right. Member ou812 sells stroker kits, send him a PM he will hook you up. And like Moper said you will want a good local shop to go over the kit and check all the tolerances.

 

[dusterdoug]

I had good luck getting a forged 416 kit from RPM Machine in Utah.

http://www.rpmmachine.com/scat-strokerkit-chrysler-340to416-750hp.html

The "rated to 750" crap...is well just that sales crap. BUT, nice parts all checked over by me and the machinest that did the balancing.

Motor should give us a 10.-something timeslip in a couple of weeks...

 

[LA Dart]

Sweet .. let me know how it go's. and and or a vid of it running... nice price also..

 

[pettybludart]

I have the Eagle kit,4 inch crank(builder re-balanced.),H-beams,Eddy Rpm,s P&P,.631 lift solid roller cam,M1 intake/AED 850 HO carb/1 7/8 fenderwells.This is in my 66 Dart with a 8 inch Coan 4500 stall.Right now I have 3.91,s,but will be stepping up to a 4.56 spool once the money flows again.:-DShould be in the 10,s also?:cheers: