360/408 Stroker best gaskets?
- Thread starter Mims Gt
- Start date
-
4eighteener
Well-Known Member
I tend to piecemeal things out to get specific gaskets I want, mainly head, valve cover, and oil pan, anything else I just use the typical felpro kit. Unfortunately there kit usually includes a .055 thick head gasket, too much for a good quench on most builds.
Although I do tend to lean towards using their 1008 head gasket even with the 4.180 bore size. I recently read a Pittsburgh racer post saying a larger bore head gasket gives the porter more room to work the chambers.
Anyway, mahle is a good brand at a reasonable price, and top of the line cometic at over $200, but I have never used their complete kit.
I am not sure if it is true, but I follow the myth about synthetic oils leaking through cork gaskets and tend to buy the metal backed rubber for valve covers and oil pans.
Of course, only using synthetic oils on roller engines.
Although I do tend to lean towards using their 1008 head gasket even with the 4.180 bore size. I recently read a Pittsburgh racer post saying a larger bore head gasket gives the porter more room to work the chambers.
Anyway, mahle is a good brand at a reasonable price, and top of the line cometic at over $200, but I have never used their complete kit.
I am not sure if it is true, but I follow the myth about synthetic oils leaking through cork gaskets and tend to buy the metal backed rubber for valve covers and oil pans.
Of course, only using synthetic oils on roller engines.
Plymouth 65
I'll be in the shop
Felpro 1008. 65'
furrystump
Well-Known Member
- Joined
- Nov 13, 2004
- Messages
- 2,314
- Reaction score
- 1,937
Studs or bolts?
4eighteener
Well-Known Member
I see hughes engine sells a performance set of felpro gaskets with the 1008 head gasket included hug30340
Piece meal for a performance build. Felpro kit for stock rebuild.
-
